Band Saw Jet Professional Range

Jet JWBS-18Q Bandsaw

• Two selectable blade speeds
• Cast iron blade wheels
• Cast iron tilting table (-10° to +45°)
• Locking rip fence
• Parrallel cutting attachment
• T-slotted mitre fence
• Fully interlocked doors
• Electro-mechanical motor brake
• Quick release and tensioning blade system
• Blade tracking control
• Optional mobile base

The Jet JWBS-18Q is intended for heavy work and has two blade speeds, balanced cast iron blade wheels, a super cast iron table which can tilt from -10° to +45°, a locking rip fence which is supported at the front and rear of the table and extends slightly beyond the cast iron table to give an excellent capacity on both sides of the blade. On the face of the rip fence is a parrallel cutting attachment which is ideal for re-sawing. The mitre fence is 'T' slotted into the table for accuracy, safety and extended capacity. The blade is guided both above and below the table with micrometer-adjusted thrust and bearing rollers which give a positive support to the blade, resulting in a very good quality of cut and extended blade life.
With fully interlocked doors, electro-mechanical motor brake, easily accessible, dual function quick release blade tension for easy blade changing and tracking controls, this machine is for the professional workshop where an accurate bandsaw with good capacities will become a very popular machine with which to work. To move this machine around the workshop we recommend the purchase of the mobile base unit (Stock Number 708119). This additional base unit is easy to fit and allows the machine to be moved without fear of tipping the unit over or causing any damage to either the operator or the machine.
N.B. A 20A supply is recommended when used with 240 volt supply.Jet JWBS-18Q Bandsaw

Specification
Model JWBS- 18Q
Blade Length 3,480mm
Blade Speed 550/970 m/min
Blade Width Min/Max 3mm(1/8")/32mm(1.1/4")
Dust Extraction Outlet 100mm (x2)
Max Width of Cut 460mm
Max Depth of Cut 300mm
Max Width of Cut with Fence 410mm
Nett Weight 165kg
Overall L x W x H 900 x 1,100 x 1,900 mm
Power 2.6kW (240V) - 4.2kW (415V)
Rating Industrial
Table Height 950mm
Table Size 485 x 485mm
Table Tilt -10° to +45°
Wheel Diameter 470mm

Jet JWBS-20Q Bandsaw

• Two selectable blade speeds
• Cast iron blade wheels
• Cast iron tilting table (-10°to +45°)
• Locking rip fence
• Parrallel cutting attachment
• T-slotted mitre fence
• Fully interlocked doors
• Electro-mechanical motor brake
• Quick release and tensioning blade system
• Blade tracking control
• Optional mobile base

With precision T-style fence assembly and parallel cutting device for special cutting jobs the Jet JWBS-20Q can tackle most large cutting tasks. The extra large cast iron table tilts -10° to + 45° and is supported on each side by large trunnions. The balanced cast iron wheels are tyred with a curved, long-life PU coating. Performance is further improved by the upper and lower precision guides, which also extend blade life. The two blade speeds of 550 & 970 m/min are selectable via stepped pulleys. There is precise and simple adjustment of the cutting height of the upper blade guide using large-size hand wheel and rack system. Built-in as standard is a cutting height scale making it simple to read the exact depth of the cut. A conveniently mounted, dual function blade tension handlever has an easy-to-read blade scale. The mitre gauge tilts 60³ to each side of centre. This is a highly accurate, smooth cutting bandsaw, well suited to the industrial workshop. A 20 A supply is recommended with a 230v 1ph JWBS-20Q .

Specification
Model JWBS-20Q
Blade Length 3,820mm
Blade Speed 50 / 970m /min
Blade Width Min/Max 3mm(1/8")/32mm(1.1/4")
Dust Extraction Outlet 100mm (x2)
Max Width of Cut 508mm
Max Depth of Cut 300mm
Max Width of Cut with Fence 480mm
Nett Weight 230kg
Overall L x W x H 900 x 1100 x 1900mm
Power 2.6KW (240V ) - 4.2KW (415V )
Rating Industrial
Table Height 930mm
Table Size 530 x 530mm
Table Tilt -10° to +45°
Wheel Diameter 520m

Heavy aluminum cast machine body
Robust machine table tilts 45º, with adjustable stop for square
Quiet 350 W induction motor
12V machine lamp with automation On
Balanced bandsaw wheels with long-life PU coating
Precision miter gauge with alumium profile tilts 60º L & R
Upper and lower blade guides extend blade life
Supplied complete with rip fence, miter gauge, machine lamp and 6mm sawblade

SPECIFICATION
Motor P1 350 W
Depth of Cut 80 mm
Width of Cut 230 mm
Blade Length 1510 mm
Blade Width 3 - 10 mm
Wheel Diameter 240 mm
Blade Speed 670m/min
Table Size 300 x 300 mm
Table Tilt 0º - 45º
Dust Port Diameter 48 mm
Weight 17 Kg

Precision T-style fence assembly
• Extra large cast iron table
• Balanced cast iron wheels
• Upper and lower precision guides for improved performance
• Precise and simple adjustment of the cutting height
• Standard built-in cutting height scale
• Easy-to-read blade tension scale
• Mitre gauge tilts 60°

With precision T-style fence assembly and parallel cutting device for special cutting jobs the Jet JWBS-20 MK2 can tackle most large cutting tasks. The extra large cast iron table tilts -10° to +45° and is supported on each side by large trunnions. The balanced cast iron wheels are tyred with a curved, long-life PU coating. Performance is further improved by the upper and lower precision guides, which also extend blade life. There is precise and simple adjustment of the cutting height of the upper blade guide using large-size hand wheel and rack system. Built-in as standard is a cutting height scale making it simple to read the exact depth of the cut. A large, cast iron blade tension handwheel has an easy-to-read blade tension scale. The mitre gauge tilts 60° to each side of centre.

Standard equipment includes:

• On/Off switch with no voltage release
• Adjustable mitre gauge
• 100mm (x 2) dust ports
• Precision fence
• 20mm bandsaw blade with 7mm pitch
• Upper and lower precision blade guides

Specification
Blade Length 3,820mm(150")
Blade Speed 1,000m/min
Blade Width Min/Max 6mm/32mm
Dust Extraction Outlet 100mm (x 2)
Max Width of Cut 508mm
Max Depth of Cut 300mm
Max Width of Cut with Fence 458mm
Nett Weight 230kg
Overall L x W x H 900 x 1,100 x 1,970mm
Power Input 1,470W (240V) - 2.2k (415V)
Rating Industrial
Table Height 930mm
Table Size 530 x 530mm
Table Tilt -10° to +45°
Wheel Diameter 520mm
Input Power S6 40% 2.6kW(240V) 4.2kW(415V)
Output Power S6 40% 1,500W(240V) 2.2kW(415V)

Jet JWBS-16 MK2 Bandsaw

• Cast iron blade wheels
• Cast iron tilting table (-10° to +45°)
• Locking rip fence
• Point cutting attachment
• T-slotted mitre fence
• Fully interlocked doors
• Electro-mechanical motor brake
• Blade tension and tracking controls
• Optional mobile base

The Jet JWBS-16 MK2 is intended for heavy work and has cast iron blade wheels, a super cast iron table which can tilt from -10° to +45°, a locking rip fence which is supported at the front and rear of the table and extends slightly beyond the cast iron table to give an excellent capacity on both sides of the blade. On the face of the rip fence is a point cutting attachment which is ideal for re-sawing. The mitre fence is 'T' slotted into the table for accuracy, safety and extended capacity. The blade is guided both above and below the table with micrometer-adjusted thrust and bearing rollers which give a positive support to the blade, resulting in a very good quality of cut and extended blade life.
With fully interlocked doors, electro-mechanical motor brake and with easily accessible blade tension and tracking controls, this machine is for the professional workshop where an accurate bandsaw with good capacities can become a very popular machine with which to work. To move this machine around the workshop we recommend the purchase of the mobile base unit (Stock Number 708119). This additional base unit is easy to fit and allows the machine to be moved without fear of tipping the unit over or causing any damage to either the operator or the machine.
N.B. A 20A supply is recommended when used with 240 volt supply.

Specification
Model JWBS-16 MK2
Blade Length 3,124mm(123")
Blade Speed 900m/min
Blade Width Min/Max 3mm(1/8")/32mm(1.1/4")
Dust Extraction Outlet 100mm (x 2)
Max Width of Cut 405mm
Max Depth of Cut 250mm
Max Width of Cut with Fence 355mm
Nett Weight 130kg
Overall L x W x H 800 x 950 x 1,850mm
Power Input 1,100W (240V) - 1,470W (415V)
Rating Industrial
Table Height 890mm
Table Size 430 x 430mm
Table Tilt -10° to +45°
Wheel Diameter 420mm
Input Power S6 40% 1,900W(240V) 2.8kW(415V)
Output Power S6 40% 1,100W(240V) 1,500W (415V)

• Quick clamping lever to release blade tension when not in use
• Rack system for easy adjustment of the upper blade guide
• Rip fence assembly with re-saw attachment
• Precision table with polished cast iron surface
• Table tilts -10° to +45°
• Steel base
• 100mm dust port
• Upper and lower blade guides

The JWBS-14 features an exclusive design with quick clamping lever that is used to release the blade tension when the machine is not in use, extending the blade life. A rack guide, with millimetre scale for accurate adjustment, raises or lowers the upper blade guide. The machine's casing is a solid welded design for smoother, low vibration operation. A T-style rip fence assembly has a re-saw attachment giving a single point fence for perfect parallel curve cutting. The precision ground table has a polished cast iron surface and tilts from -10° to +45°. The machine sits on a strong steel stand.

Standard equipment includes:
• Quick blade tensioning lever
• On/off switch with no voltage release
• Mitre cutting guide 60°
• 100 mm dust port
• Precision fence with parallel cutting device

SPECIFICATION
Model JWBS-14
Blade Length 2,552mm(100.1/2")
Blade Speed 800m/min
Blade Width Min/Max 3mm/25mm
Dust Extraction Outlet 100mm
Max Width of Cut 350mm
Max Depth of Cut 200mm
Max Width of Cut with Fence 300mm
Nett Weight 90kg
Overall L x W x H 770 x 650 x 1,800mm
Power Input 550W
Rating Trade
Table Size 500 x 385mm
Table Tilt 10°-0-45°
Wheel Diameter 355mm