Charnwood Picture Framing Kits

New for 2011.

The latest addition to our range of picture framing tools allowing the hobby framer or artist to be able to join professional looking frames at home.

The frame clamp has a quick action mechanism to quickly and securely hold the two mitred pieces of moulding. Once clamped, the corner is turned upside down and positioned on the non-slip base and up against the fence for accurate location of the wedge. The fence itself can be positioned to allow for any sized picture frame moulding, up to 75mm wide, with a front and back locating stop which can be set when using wider mouldings which require two wedges in each corner.

When working with taller mouldings, up to 100mm, it is possible to perform an operation known as stacking, where two wedges are inserted on top of each other. The second wedge pushes the first one in deeper so that inserting 2 x 10mm height wedges is the equivalent of a 20mm wedge.

The driver for inserting the wedges has a square shaped magnetic tip which securely holds the next wedge in place. The hand lever is pushed down, which does not require much force and can be operated by anybody, Until the wedge is fully inserted and flush with the back of the frame.

Once all 4 corners have been joined the frame is ready for the artwork to be put in, the backing board secured in place, using our T225 Tab Driver, and then hung on the wall. We include a FREE hardware kit to provide the finishing touch.

FREE 266 Piece Hardware Kit;
100 x 7mm Wedges
100 x 10mm Wedges
5m Picture Hanging Wire
8 x Screw Eyes
8 x D Rings
8 x Screw Rings
6 x Large Wall Hook
4 x Small wall hook
10 x Wood screw
20 x Masonry Nail
1 x Frame leveler (Spirit Level)

Most Economical Framing Kit Ever
Can be used by Anybody
Mitre Clamp Included
Adjustable for Inaccurate Mitres
V-Nail Driver Included
100 V-Nails Included
65 Piece Hardware Kit Included

A frame assembly kit which can be used to assemble any mitred 4 sided frame. The kit includes a mitre clamp with adjustable sides to account for a slightly inaccurate mitre, a magnetic tipped V-nail driver (use your own hammer) and a 165 piece hardware kit for finishing and hanging the frame.

Harware kit contents 5 metres of picture wire, 100 Vee nails, 8screw rings, 8 screw eyes, 20 wall pins, 10 brass screws, 8 D-rings, 6 large picture hooks, 4 small picture hooks.

Universal Vee nails (also known as wedges) 7mm height, suitable for double stacking to 14mm. Supplied in magazine strips, glue bonded.

Universal Vee nails (also known as wedges) 10mm height, suitable for double stacking to 20mm. Supplied in magazine strips, glue bonded

Universal Vee nails (also known as wedges) 12mm height, suitable for double stacking to 24mm. Supplied in magazine strips, glue bonded.

Universal Vee nails (also known as wedges) 15mm height, suitable for double stacking to 30mm. Supplied in magazine strips, glue bonded.