Charnwood W601 Combination Machine

Free Delivery to all Orange areas on our shipping map






Space Saving Combination Design.

Planer
Thicknesser
Table Saw
Spindle Moulder
Sliding Carriage

The Universal is actually made up from our two seperate machines W583 planer thicknesser and W613 Saw / Moulder Combination. The joining kit is supplied and the electrics connect so that all functions are controlled from a single selector switch. The advantage of being able to break the machine into two halves is that you can actually fit the machine through a 24" wide doorway.

Save £100 buying as a Universal combination machine !

Planer Thicknesser; Precision ground cast iron beds and a long tilting fence which can be positioned at any point across the table make this machine a delight to use. The 3 knife cutterblock is powered by a 2hp induction motor and is capable of a cut up to 5mm deep in a single pass.
To gain better visibility and access for thicknessing, both of the planing beds are hinged and swing out of the way, without using any tools. A dust hood / cutter gaurd is then swung into position and the conversion to Thicknesser is complete.
The feed roller drive, which features a rubber outfeed roller, can be disengaged during planing operations to save motor power and general wear on the machine.
Supplied with 3 knives, 100mm dust extraction outlet, 4 adjustable feet, cable and plug.

W583 Planer Thicknesser Specification ...


Circular Saw; The Tungsten sawblade will give a cut of 70mm at 90 degrees. The large table surface area enables rip cuts of up to 450mm to be made using the fence. There is an accurate sliding mitre guage for small cross cut pieces and a full sliding carriage for crosscutting panels up to 600mm. Dust is collected from above the blade and below the blade from a single collection point of 100mm diameter.


Spindle Moulder; To use the spindle moulder the sawguard is removed and the saw blade lowered bolow the surface of the table. The moulder fence has a heavy cast iron body with large wooden fences. The fences are independantly adjustable to close right up on the cutter and to step out the back fence when a complete face is being removed. A hinged top allows the spindle to be quickly accessed for tooling changes. Top and front spring pressures ensure complete safety and firm placement of the work piece at all times. Dust and chips are collected via a 100mm outlet at the back of the fence.

Sliding Carriage; The sliding carriage consists of a cast iron table and bearing guides running along an aluminium extrusion. The fence can be used either infront of the work piece or behind it, the former giving a crosscut capacity of 700mm. The fence can be angled accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again. A hold down clamp and a length stop complete the equipment.Supplied with 24 tooth TCT sawblade, Saw guard extraction hose, 100mm diameter dust extraction connector on each function, mitre guide, push stick, cable & plug.

Specification
Saw & Spindle Moulder
Specification
Table size 410mm x 940mm
Table saw motor (induction) 1500w, 240v
Cutting depth at 90/45 degrees 70mm / 55mm
Blade diameter x Bore 254mm x 30mm
Blade tilt 90 - 45 degrees
Sliding table stroke 750mm
Sliding table size 400mm x 250mm
Spindle moulder motor (induction) 1500w, 240v
Spindle diameter x height 30mm x 83mm
Maximum tooling diameter 140mm
Spindle stroke 80mm
Spindle speed 6500rpm
Dimensions (WxDxH) 1170mm x 1130mm x 1160mm
Weight 140kg
Rating Light trade
Warranty 1 year

Planer Thicknesser
Surfacing width 250mm
Length of surfacing tables 1085mm
Maximum depth of cut 5mm
Fence tilt 90-45
Thicknessing capacity 195mm
Length of thicknessing table 600mm
Table height 856mm
Number of Knives 3
Feed speed 5.5m/min
Motor (induction) 1500w, 240v, 1ph
Dimensions (WxDxH) 1085mm x 1000mm x 600mm
Weight 150Kg
Rating Trade

Spindle moulder cutter block, specifically designed for rebating. Fits any moulder with a 30mm diameter spindle. The cutterblock has 2, double edged, planing knives and 4 spur cutters. The spur cutters give a clean crisp edge to the internal corner when rebating. The spurs can removed if required.

We also include a guide ring, which consists of a bearing with 30mm bore and a collar to run the work piece along. It is used for cutting rebates into curved timber, but should only be used with an appropriate ring fence fitted to the moulder.

The block is supplied in a foam lined aluminium storage case to keep it safe.

The cutting knives are double edged and replacements are supplied as a pair.
the spur cutters have 4 points and replacement s are supplied as a set of 4.


Specification:
Diameter 85mm
Height 50mm
Bore 30mm
Rebating Knives 2
Spur Cutters 2 Top, 2 Bottom
Maximum rebate cut 25mm
Guide Bearing Diameter 85mm

Pair of knives for rebate cutterblock 50mm in length.
Double edged.

Spindle Moulder cutterblock with limitors. This steel block is compatible
with all 40mm Euro pattern cutters. The set includes straight knives plus 6
profiles and is supplied in a plastic storage case.


Diameter 98mm
Height 40mm
Bore 30mm
Pin diameter 6mm
Pin centres 24mm

Cutterblock Diameter 98mm
Cutterblock Height 40mm
Cutterblock Bore 30mm
Maximum Speed 8,000 rpm
Rating Trade