Charnwood W683 Table Saw / Spindle Moulder Combination Machine

Free Delivery to all Orange areas on our shipping map

















SPECIAL LAUNCH OFFER - FREE Spindle Moulder Cutterblock with 7 Profiles - Worth £99.99

3 Function Combination Machine; Circular Saw, Spindle Moulder & Sliding Carriage

With a cast iron table and heavy steel casing this superb combination machine offers the small workshop incredible versatility. A simple function selector switch starts and stops the machine.

Circular Saw; The Tungsten sawblade will give a cut of more than 2" at 90 degrees. The large table surface area enables rip cuts of up to 16" to be made using the fence. There is an accurate sliding mitre guage for small cross cut pieces and a full sliding carriage for crosscutting panels up to 24". Dust is collected from above the blade and below the blade from a single collection point of 100mm diameter.

Spindle Moulder; To use the spindle moulder the sawguard is removed and the saw blade lowered bolow the surface of the table. The moulder fence has a heavy cast iron body with large wooden fences. The fences are independantly adjustable to close right up on the cutter and to step out the back fence when a complete face is being removed. A hinged top allows the spindle to be quickly accessed for tooling changes. Top and front spring pressures ensure complete safety and firm placement of the work piece at all times. Dust and chips are collected via a 100mm outlet at the back of the fence.

Sliding Carriage; The sliding carriage consists of a cast iron table and bearing guides running along an aluminium extrusion. The fence can be used either infront of the work piece or behind it, the former giving a crosscut capacity of 700mm. The fence can be angled accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again. A hold down clamp and a length stop complete the equipment.

Supplied with 24 tooth TCT sawblade, Saw guard extraction hose, 100mm diameter dust extraction connector, mitre guide, push stick, cable & plug.

This machine can be further expanded by adding our W583 10" x 7" Planer Thicknesser. The two units are joined togethor (The joining kit is included with the W683) to become a 5 function universal machine all controlled from a central switching point. For further details see Universals or W600.

Specification:
Table Size 410mm x 940mm
Table Saw Motor (Induction) 1100w
Cutting Depth at 90/45 degrees 60mm / 42mm
Blade Diameter x Bore 200mm x 30mm
Blade Tilt 90 - 45 degrees
Sliding Table Stroke 750mm
Sliding Table Size 400mm 250mm
Spindle Moulder Motor (Induction) 1500w
Spindle Diameter x Height 30mm x 83mm
Maximum Tooling Diameter 140mm
Spindle Stroke 80mm
Spindle Speed 6500rpm
Dimensions (WxDxH) 1170mm x 1130mm x 1160mm
Weight 140kg
Rating Light Trade

Spindle Moulder cutterblock with limitors. This steel block is compatible
with all 40mm Euro pattern cutters. The set includes straight knives plus 6
profiles and is supplied in a plastic storage case.


Diameter 98mm
Height 40mm
Bore 30mm
Pin diameter 6mm
Pin centres 24mm

Cutterblock Diameter 98mm
Cutterblock Height 40mm
Cutterblock Bore 30mm
Maximum Speed 8,000 rpm
Rating Trade

Two sizes of aluminium safety block, both with 30mm bores, which will accept the whole range of Euro cutters and limiters shown on the following pages.
For those who are unfamiliar with spindle moulder tooling, limiters are a safety device designed to limit the amount of cut taken by the cutters on each rotation of the block. They take the form of a dummy cutter with the profile cut a millimetre or two below the cutter profile and the sharp edges removed. They fit into the slots in the block in front of the main cutters and are secured by the same wedge as the cutters.
The blocks are supplied in a storage case with a pair of rebate knives and limiters and storage slots for six further pairs of cutters or limiters.