Dry Wall Sander Fox

DON'T FORGET "FREE SHIPPING"
To The Orange Areas
AND A THREE YEAR WARRANTY


The FDW550 Variable Speed Drywall Power Sander provides one of the most efficient methods possible of sanding drywall and plaster walls and ceilings. Get the job done many times faster, with less effort and with better results than ever before – and all in the comfort of a more dust free work environment. The 4 metre hose with bayonet swivel connection is designed to work in conjunction with a vacuum to ensure that there is less dust in the air and less sandpaper clogging – all with a minimum of after clean-up.
The pivoting sanding head follows the contours of the work to allow a perfect, swirl-free finish.
The speed is infinitely variable between 650 and 1600 rpm so that the speed can be tailored to the work surface for best results.
The velcro backed sandpaper discs and backing pads take only seconds to change.
Less scaffolding is needed since most ceilings can be sanded from the floor below.
The excellent balance and light weight allow you to finish the job without fatigue.

SPECIFICATIONS
MODEL: FDW550
Variable Speed
Drywall Power Sander
POWER: 550W
VOLTAGE: 110V / 60Hz
NO LOAD RPM: 650 - 1600
FULL LOAD RPM: 280 - 950
GRINDING DISK: ø225mm (8-7/8")
LENGTH: 154cm (61")
WEIGHT: 4.5kgs (9.9lbs)

DON'T FORGET "FREE SHIPPING"
To The Orange Areas
AND A THREE YEAR WARRANTY

The FDW550 Variable Speed Drywall Power Sander provides one of the most efficient methods possible of sanding drywall and plaster walls and ceilings. Get the job done many times faster, with less effort and with better results than ever before – and all in the comfort of a more dust free work environment. The 4 metre hose with bayonet swivel connection is designed to work in conjunction with a vacuum to ensure that there is less dust in the air and less sandpaper clogging – all with a minimum of after clean-up.
The pivoting sanding head follows the contours of the work to allow a perfect, swirl-free finish.
The speed is infinitely variable between 650 and 1600 rpm so that the speed can be tailored to the work surface for best results.
The velcro backed sandpaper discs and backing pads take only seconds to change.
Less scaffolding is needed since most ceilings can be sanded from the floor below.
The excellent balance and light weight allow you to finish the job without fatigue.

SPECIFICATIONS
MODEL: FDW550
Variable Speed
Drywall Power Sander
POWER: 550W
VOLTAGE: 110V / 60Hz
NO LOAD RPM: 650 - 1600
FULL LOAD RPM: 280 - 950
GRINDING DISK: ø225mm (8-7/8")
LENGTH: 154cm (61")
WEIGHT: 4.5kgs (9.9lbs)

F50-800 Dust Extractor

Our latest complement to the extraction tool range, the F50-800 is a must for any tradesman or craftsman. Featuring a 1400W motor (1000W-110V) for strong reliable performance, coupled with a powertool take-off socket for automatic start-up and delayed shutdown of extractor this allows the operater to plug the tool of their choice into the vacuum.
Emptying the 30L container is straightforward, thanks to a highly practical drainage outlet. Additionally, the extractor may be used as a blower, with a connection port situated in the motor head. A quality range of tools and accessories include stainless steel tubes, a floor nozzle, a crevice tool, wet and dry filters, and dust bag.

TECHNICAL SPECIFICATIONS
Motor: 110V x 1000W
Power take-off: 110V
Drum Capacity: 30L
Filtration: 0.5 micron
Inlet Hose Diameter 35mm OD
Flow Rate 2cbm/min
Weight: 10kg

Fox Velcro Sanding pads are specifically designed with perforations across the whole surface
allowing the swarf to be extracted, not only away from the edges, but through the holes across
the whole pad. This results in:
• Increased sanding performance
• Reduced clogging of pad
• Less dust in the air
• Increased pad life