Dust Extractor - Charnwood W680

Found a better price? Call us on :- 01622-884651
and we'll try to beat it.
A quick phone call could save you £'sssss




Free Delivery to all Orange areas on our shipping map

Light Weight and Portable
High Velocity Extraction
Ideal For Power Tools
Two Stage 0.5micron Filter
2 Metre Length of Hose Included
3 Replacement Filter Bags Included

A drum type extractor with a 50 litre capacity ideal for small workshops using bench top machinery and powertools. Because these machines generate a high speed of air through the hose they are suitable for reducing down to a smaller diameter hose when using power tools. At the heart of the extractor is a 0.5 micron cartridge filter which is fine enough to filter dust from every machine in the workshop. The compact size makes it particularly appealing for smaller workshops, where space is a premium, and it can be kept underneath a bench. A quick action clamp releases the lid of the drum to empty it out.

Supplied with 2m hose, 2 hose clamps, 3 replacement filter bags, 2m cable and plug.

Specification
Motor (carbon brush) 1100w
Voltage 240v
Flowrate 3.05m3/min (53L/sec)
Inlet Diameter 100mm
Drum Capacity 50 Litres
Dimensions (WxDxH) 390mm x 450mm x 670mm
Weight 12Kg
Rating DIY / Light trade

Replacement outer filter.

A thick paper based filter bag which sits over the outside of the cartridge filter to protect it from flying chips.

Under normal hobby use these filters need replacing every 6 months or so. A visual inspection will soon determine if there are any tears in the bag.

Tip: By rotating the lid of the extractor round by 90 degrees each time you empty the drum, you can extend the life of the filter bag by 4 times.

Replacement 0.5micron filter.

With normal levels of hobby use the inner filter should last for a couple of years. Eventually it will get clogged up and the performance of the extractor will deteriorate. It is very simple to replace, no tools required.