Hose Connectors and More

Online Catalogue | Click here to see our discounted products. Any item in this list will receive a 55% discount unless the item is marked different |  Hose Connectors and More

Additional 45° Elbow for 63mm Dust Extraction Kit
Ref: 410065
Price:£1.00 (£1.15 Including VAT at 15%)

Quantity:  

Additional Reducer (100 to 63mm) for 63mm Dust Extraction Kit
Ref: 10063RC.
Price:£2.99 (£3.44 Including VAT at 15%)

Quantity:  

Heat Shrink Sleeve - 63-31mm x 100mm
Heat Shrink Sleeve - 63-31mm x 100mm Ref: 510162

Heat Shrink Sleeve

• Perfect solution for odd sized dust extraction outlets
• Simply held in place and shrunk to size with a heat gun
• Available in three sizes
• Maximum diameter of 63mm shrinking down to 31mm (510162)
• Maximum diameter of 79mm shrinking down to 38mm (510170)
• Adhesive inner surface and shrinking down from 105mm to 35mm (510109)
• All sizes 100mm long
A heat shrink sleeve available in three sizes that can simply be held in place and shrunk to size with a heat gun. The perfect solution for odd sized dust extraction outlets. 510162 has a maximum diameter of 63mm shrinking down to 31mm, 510170 has a maximum diameter of 79mm and shrinks down to 38mm and the 510109 has an adhesive inner surface and shrinks down from 105mm to 35mm. All sizes are 100mm long.

Price:£4.50 (£5.18 Including VAT at 15%)


Quantity:  

Heat Shrink Sleeve - 79-38mm x 100mm
Ref: 510170
Price:£6.00 (£6.90 Including VAT at 15%)

Quantity:  

Heat Shrink Sleeve Adhesive - 105-35mm x 100mm
Ref: 510109
Price:£7.90 (£9.09 Including VAT at 15%)

Quantity:  

Rubber Adaptor Bung 110-50mm
Ref: 341103
Price:£5.63 (£6.47 Including VAT at 15%)

Quantity:  

Soil Pipe Adaptor - Threaded 100mm (4")
Ref: 990030
Price:£6.36 (£7.31 Including VAT at 15%)

Quantity:  

Soil Pipe Adaptor - 75mm (3")
Ref: 910499
Price:£8.59 (£9.88 Including VAT at 15%)

Quantity:  

Steel Saw Table Adaptors 100-50
Steel Saw Table Adaptors 100-50 Ref: 810353

Steel Saw Table Adaptors

• A simple answer for using saw table top guard extraction points
• Two galvanised adaptors for going in line with the 100mm hose and provide a connection for the top guard hose
• Available in either 50mm or 38mm

With so many saw tables now with extraction both under the saw and over the top on the saw guard it is often the case that the top guard extraction point is never used because there is no easy means of joining in the smaller hose. Here is a simple answer, two galvanised adaptors which go in line with the 100mm hose and provide a handy connection for the top guard hose, either 50mm or 38mm.

Price:£26.25 (£30.19 Including VAT at 15%)


Quantity:  

Steel Saw Table Adaptors 100-38
Ref: 810352
Price:£26.25 (£30.19 Including VAT at 15%)

Quantity:  

Hose Fixing Clip - 75mm (3
Hose Fixing Clip - 75mm (3") Ref: 410477

Hose Fixing Clips

• Secures hose ends and suitable for many other applications
• Second to none on exhaust repairs!
• 510405: a flexible driver with a hexagon end socket, tighten your clips quickly and safely


Price:£1.91 (£2.20 Including VAT at 15%)


Quantity:  

Hose Fixing Clip - 150mm (6")
Ref: 410488,,.
Price:£2.77 (£3.19 Including VAT at 15%)

Quantity:  

Tee Junction - ABS 75mm (3
Tee Junction - ABS 75mm (3") Ref: 900327

T Junctions

• Manufactured from high quality ABS plastic
• Smooth internal bore
• Outside diameters allow for a snug fit into the appropriate size of flexible hose
• Should be inserted into plastic hose and secured using fixing clips

This T Junction hose ducting accessory is manufactured from high quality ABS plastic and is strong with a smooth internal bore. The outside diameters of the fitting allow for a snug fit into the appropriate size of flexible hose and secured using fixing clips.

Price:£8.50 (£9.78 Including VAT at 15%)


Quantity:  

Tee Junction ABS - 100mm(4")
Ref: 900337
Price:£7.00 (£8.05 Including VAT at 15%)

Quantity:  

Reducing Cone 100mm to 50mm
Reducing Cone 100mm to 50mm Ref: 10050RC

Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets. It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a minimum. A 100mm hose clamp should be used to fasten the hose the reducer.

From: Outside diameter 100mm, Inside diameter 93mm
To: Outside diameter 50mm, Inside diameter 45mm


Price:£4.75 (£5.46 Including VAT at 15%)


Quantity:  

Reducing Cone 100mm to 50mm
Reducing Cone 100mm to 50mm Ref: 10063RC

From: Outside diameter 100mm, Inside diameter 93mm
To: Outside diameter 50mm, Inside diameter 45mm

Price:£4.75 (£5.46 Including VAT at 15%)


Quantity:  

Reducing Cone 100mm to 75mm
Reducing Cone 100mm to 75mm Ref: 10075RC

From: Outside diameter 100mm, Inside diameter 93mm
To: Outside diameter 75mm, Inside diameter 68mm

Price:£4.75 (£5.46 Including VAT at 15%)


Quantity:  

Reducing Cone 100mm to 125mm
Reducing Cone 100mm to 125mm Ref: 100125RC

From OD 100mm, ID 93mm
To OD 125mm, ID 119mm

Price:£4.75 (£5.46 Including VAT at 15%)


Quantity:  

Reducing Cone 61mm to 38mm
Reducing Cone 61mm to 38mm Ref: 6138RC

From: Outside diameter 61mm, Inside diameter 51mm
To: Outside diameter 38mm, Inside diameter 31mm

Price:£4.75 (£5.46 Including VAT at 15%)


Quantity:  

Dust Collection Hood 160mm x 160mm
Dust Collection Hood 160mm x 160mm Ref: 160DH

Often used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery such as lathes. A 100mm diameter hose clamp should be used to secure the hose.
Dimensions 160mm x 160mm with a 100mm diameter outlet

Price:£4.75 (£5.46 Including VAT at 15%)


Quantity:  

Dust Collection Hood, 310mm x 310mm
Dust Collection Hood, 310mm x 310mm Ref: 310DH

Often used to adapt older machinery which did not originally have extraction points fitted or to make collection funnels for other types of machinery such as lathes. A 100mm hose clamp should be used to secure the hose.
Dimensions 310mm x 310mm with a 100mm diameter outlet.


Price:£5.60 (£6.44 Including VAT at 15%)


Quantity:  

Power Tool Adaptor 22mm-30mm
Ref: 610325,
Price:£5.37 (£6.18 Including VAT at 15%)

Quantity:  


Online Catalogue | Click here to see our discounted products. Any item in this list will receive a 55% discount unless the item is marked different |  Hose Connectors and More