Jet 4224 Heavy Duty Woodturning Lathe

Free Delivery to Orange areas






Found a better price? Call us on :- 01622-884651
and we'll try to beat it.
A quick phone call could save you £'sssss


* 305mm centre height
* Capacity to produce really big bowls and platters
* Distance between centres 1,065mm
* Outboard turning attachment
* Input 2.2kW induction motor drives three pulley ratios
* Electronic variable speed
* Optional extended bed and free standing tool rest

This is the largest of our lathes and has, with its centre height of 305mm, the capacity to produce really big bowls and platters. The centre distance is 1,065mm, increasing to 2,715mm with the optional extended bed fitted, will allow some very substantial table legs, bed posts and banister rails to be produced. The outboard turning attachment, which bolts onto the left-hand end of the machine, allows for bowl turning up to 1,270mm diameter with the standard tool rest, and even bigger work can be tackled using the optional free standing tool rest. Power is delivered by a 2.2kW induction motor driving through a choice of three pulley ratios. The speed is electronically variable within each ratio, giving an overall range of Low 0-910rpm Med 0-2,000rpm High 0-3,500rpm. All the controls, on/off switch, speed control, forward/reverse selector and tachometer, are conveniently positioned on the front panel for easy access.

Specification
Model: 4224
Distance Between Centres: 1,065mm
Nett Weight: 440kg
Overall L x W x H: 1,850 x 610 x 1,240mm
Power: Input 2.2kW
Rating: Industrial
Speed: Low 0-910rpm Med 0-2,000rpm High 0-3,500rpm
Spindle Taper: 2MT
Spindle Thread: M33 X 3.5mm (Ref T38)
Taper Tailstock: 2MT
Max Diameter over Bed: 610mm

This very heavy duty support is designed to be used with the Professional or any other lathe with a rear turning facility. The arm at the top, which has a hole to mount a 1" diameter tool rest, slides up and down to give a working height range from 1,000mm and 1,240mm above the floor.

* 1,650mm bed extension
* Comes with supporting leg
* Fits Jet 4224 woodturning lathe

1,650mm bed extension for use with the Jet 4224 woodturning lathes. Comes complete with a supporting leg.

* 150mm faceplate
* M33 X 3.5mm thread size
* Fits Jet 3520B, 4224, 1442 and 1642 woodturning lathes
* Additional grub screws to lock faceplate onto spindle register

A substantial 150mm faceplate for use with the Jet 3520B, 4224, 1442 and 1642 woodturning lathes. Because most of these lathes have a reversing facility, the faceplates have additional grub screws for locking the faceplate onto the spindle register to stop them unscrewing in this direction of rotation.