Kreg Pocket Hole Machines

Found a better price? Call us on :- 01622-884651
and we'll try to beat it.
A quick phone call could save you £'sssss
















Kreg Foreman Pocket Hole Machine

• Semi-Automatic pneumatic, small workshop solution
• Lever operated, one second cycle time
• 12mm to 38mm thick material capacity
• Fast, semi-automatic operation; automatic "hands-free" clamping
• Quiet 3/4hp pneumatic drill motor with lever operated drill stroke
• Reliable, one-step drilling operation; drills flat-bottom, round-sided pocket hole that can be plugged
• Stable work surface with easily adjustable "swing-stop" material positioning guides
• Hinged-top that allows easy access to drill bit and motor

When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the Foreman Pocket Hole Machine. The semi-automatic Foreman features a pneumatic drill motor and automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the 3/4hp drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply. 90-120psi recommended - minimum compressor capacity of 5.3 cfm @ 90psi.

Specification
Model KRDB55
Nett Weight 16kg
Overall L x W x H 575 x 345 x 483mm

Kreg DK1100 TP Fully Automatic Bench Top Pneumatic Pocket Hole Machine

• Hardened steel drill guide to maximize drill bit life
• One-touch, foot pedal operation
• Swing stops for optimized material positioning
• Dust collection chute for efficient chip removal

The DK1100 TP is a bench-top entirely pneumatic powered, fully-automatic pocket hole boring machine. It is housed in a compact cabinet and can be either built into a work surface saving space on the shop floor, or is easily transported from your workshop to site. 110-120psi is recommended to power the direct drive air motor, hold-down clamp and forward motion cylinder.This single-spindle machine features the ability to centre a screw in 1/2" to 1.1/2" thick material. It is a fully pneumatic machine built to run day after day in rugged, high-production environments. Hardened steel drill guides maximizes drill bit life and minimizes bit deflection. It is built to be extremely quiet for operator comfort.

Kreg DK3100 3-Spindle Floor Standing Electric Pocket Hole Machine

• 3/4", 1", and 1-3/4" spindle spacings
• Hardened steel drill guide to maximize drill bit life
• One-touch, foot pedal operation
• Swing stops for optimized material positioning
• Dust collection chute for efficient chip removal

As a result of its innovative three-spindle design, the DK3100 is the only pocket hole machine on the market that has the ability to drill two pocket holes in one machine cycle across rails of varying widths. Drill spindles in the machine are fixed at 3/4", 1" and 1.3/4" on centre allowing it to handle today's most common rail widths of 1.1/2" up to 3.3/4" with ease. Three step drill bits are utilised in the machine, one of which is left-handed. It is fast with a one second cycle time, quiet and powerful. Like all Kreg machines, the DK3100 features the ability to centre a screw in 1/2" to 1.1/2" thick material, hardened steel drill guides that maximizes drill bit life and minimizes bit deflection, swing stops that ease material positioning with both rails and panels, and a one-touch foot pedal that fires the triple spindle drill head in a lightening quick one second. Approximate weight is 100kg.

Kreg DK1100 FE Fully Automatic Floor Standing Electric Pocket Hole Machine

• Hardened steel drill guide to maximize drill bit life
• One-touch, foot pedal operation
• Swing stops for optimized material positioning
• Dust collection chute for efficient chip removal

The DK1100 FE is a floor-standing electric, fully-automatic pocket hole boring machine. Powered by an 1100W electric motor for the drill spindle of the machine. 100psi of air pressure is needed to cycle the hold-down clamp and forward motion cylinder. The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole. The hole is round sided with a flat bottom that allows a screw head to sit flushly in the bottom of the pocket and the hole to be plugged with wooden dowel. This single-spindle machine features the ability to centre a screw in 1/2" to 1.1/2" thick material. It is a fully pneumatic machine built to run day after day in rugged, high-production environments. Hardened steel drill guides maximizes drill bit life and minimizes bit deflection. It is built to be extremely quiet for operator comfort. Overall size 610 x 595 x 1260mm, table top height 1000mm.

Kreg DK1100 FP Fully Automatic Floor Standing Pneumatic Pocket Hole Machine

• Hardened steel drill guide to maximize drill bit life
• One-touch, foot pedal operation
• Swing stops for optimized material positioning
• Dust collection chute for efficient chip removal

The DK1100 FP is a floor-standing, entirely pneumatic powered, fully-automatic pocket hole boring machine. 110-120psi is recommended (the machine is 80 to 150psi rated) to power the 1.1/4hp direct drive pneumatic motor, hold-down clamp and forward motion cylinder. The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole. The hole is round sided with a flat bottom that allows a screw head to sit flushly in the bottom of the pocket and the hole to be plugged with wooden dowel. This single-spindle machine features the ability to centre a screw in 1/2" to 1.1/2" thick material. It is a fully pneumatic machine built to run day after day in rugged, high-production environments. Hardened steel drill guides maximize drill bit life and minimize bit deflection. It is built to be extremely quiet for operator comfort. Overall size 610 x 595 x 1260mm, table top height 1000mm.