Lamello Zeta T-Slot Biscuit Jointer

Free Shipping













* Unique dual function biscuit jointer
* Produces special 'T' slot for Clamex P joiners
* Can also be used as standard biscuit jointer
* Clamex P fitting is almost totally concealed
* Clamping fitting that overcomes many design problems

Offering more than a standard biscuit jointer, the Zeta has an undercut function to allow for the fitting of special concealed Clamex P connectors that slide into the 'T' slot produced. The connector also clamps, so no additional clamping methods are required. Almost totally concealed; the only visible sign is a single 6mm hole, making it ideal for many applications such as furniture, shop fitting and exhibitions. It is also suitable for solid wood and manmade boards, overcoming many design issues.
Unique to Lamello, the jointer has a special vertical mechanical drive (VMD) engaging when the jointer is at full plunge, moving the cutter up and down in one full turn and only then disengaging to produce the 'T' slot. The undercut function can be switched off and a 7mm slot will be produced, a 'Bisco' biscuit can then be used. Replace the special blade with a 4mm biscuit blade and use as a standard biscuit jointer.
As with all Lamello, product design and build are of the highest quality. Other features include precise plunge with clear depth setting, jointer fences with flush sides to make positioning simple, the fence fits with vee grooves for accuracy and clear angle scale.
The jointer is supplied in a set with a special 7mm blade, 18 pairs of Clamex, drill bit, drill stop collar, drill guide, suction adaptor and wooden box.

Specification
Model: Zeta
Dust Extraction: Yes
Nett Weight: 3.7
Power: 800W
Rating: Industrial
Tilting Base: Yes

# lastic aligning and/or connecting biscuit
# 7mm thickness
# Overall size 65 x 27 x 7mm

The Bisco can be used as an aligning or jointing biscuit, designed to work with the Clamex P connectors, it is 7mm in thickness fitting the slot produced by the Zeta biscuit jointer. This plastic biscuit is 65mm in length x 27mm wide and 7mm thick and can be glued in place if required.

* Unique fitting to overcome many design problems
* Clamps, locking joint in place and is also detachable
* No glue or screws are required, simple assembly
* Only visible sign of joint is a single 6mm hole
* Special ‘T’ slot needs to be cut by Lamello Zeta biscuit jointer
* Joint angles 30 – 180°
* Suitable for solid wood, composite boards & other sheet materials

This is a truly amazing connector with a host of uses. Lamello have overcome many design assembly problems with this clamping connector; it is almost totally invisible, only a single 6mm hole shows. The Clamex P is a biscuit shaped fitting with a ‘T’ profile that slides in place, no screws or glue are needed. Having a pivot lever and two alignment studs, this lever is driven using a hexagon key though the 6mm hole, locking the fitting together forming a very secure joint. The required slot is cut using a Lamello Zeta biscuit jointer specially developed for this application, cutting the slot and adding the ‘T’ to the bottom using a unique vertical mechanical drive. Overall length is 66mm, each half has a depth of 14.5mm, it is 7mm in width (10mm o/a with ‘T’). Supplied as a pack of 80 or 300.