Scheppach Log Splitters

Hydraulic log splitter Ox t500
Heating with wood – naturally and inexpensively! OXT500 log splitter makes it real.

This robust hydraulic splitter effortlessly cracks wood of lengths of 25 to 53 cm. The safety of operation is ensured by two-hand control, high rate and 5 t splitting power.

The machine splits in hori­zontal position at a comfortable and non-fatiguing height, you can also place it onto your workbench.

Operating service life is prolonged thanks to rustpreventing powder coating, so that ox t500 from scheppach provides the same reliable service from the day of purchasing to well into the future. Stable wheel assembly allows easy transporting.

Pleasantly warm and environmentally friendly – firewood is always in.

A wood heating system is the right choice for those who are concerned about our environment. Unlike systems that rely on fossil fuels, wood is a totally renewable resource, it has an even CO2 balance and, when burned, results in no net carbon dioxide increase.
Don’t forget that major cost savings from wood heating can be achieved. After all, everyone knows – the snuggest seat is that by the fire.

Technical data
L/W/H mm 1,240/620/990
Splitting power tons 5
Cylinder riser cm 32
Stroke approach 1st stage cm/sec 3
Stroke reverse cm/sec 8
Weight approx. kg 58
Max. wood length cm 53

Motor 230 V/50 Hz
Input kW (HP) 2.05 (2.7)
Rpm 2,800

With the new horizontal splitter Ox t700 you split firewood with powerful 7 tons up to a maximum length of 52 cm. With the fast run you quickly reach the splitting action, allowing an effortless splitting of even hard wood. Thanks to the return lock, also short logs are quickly and efficiently split.

Specification
- Continuously adjustable stroke for log lengths up to 52 cm
- Splitting power 7 tons
- Table extension and wall support standard
- 2-hand safety control
- Cylinder stroke 40 cm
- Two advance speeds of 7/3 cm/s
- Return speed 5 cm/s
- Wheel assembly standard
- Oil quantity 6 litres
- Solid, torsion-resistant steel
- Certificates CE, GS
- Dimensions: L 1060 x W 27
- Weight approx. 78.0 kg
Voltage V / Hz 230V/50Hz
Input kW (hp) 2,3 (3,1)

With its 6 ton splitting force, the Ox 1-650 has all the power necessary to split whatever is required of it. Because of its 3-fold adjustable connecting table you have the choice between short and long pieces of wood.

- Specification
- 3 different set up positions for table
- Splitting power 6 tons
- 2-hand safety control
- Cylinder stroke 48 cm
- Splitting cross standard
- Table height 315 / 575 / 760 mm
- Working height 860 mm
- Wheel assembly with 4 wheels for safe transport
- Advance speed 6 cm/s
- Return speed 12 cm/s
- Max. log length 58 / 78 / 104 cm
- Oil quantity 5,4 litres
- Hydraulic system with double-acting cylinder
- Continuously adjustable stroke
- Solid, torsion-resistant steel construction
- Certificates CE
- Dimensions: L 930 x W 830 x H 1470 mm
- Weight approx. 115,0 kg
- Voltage V / Hz 230V/50Hz
- Input kW (hp) 3,0 (4,1)

With the Ox 1-850 you split your firewood with powerful 8.5 tons. Thanks to it swing-out add-on table the machine can handle both long and short logs with equal efficiency.

- Specification
- Swing-out add-on table
- Splitting power 8.5 tons
- 2-hand safety control
- Cylinder stroke 53 cm
- Splitting cross standard
- Table height 380 / 800 mm
- Working height 920 mm
- Wheel assembly with 4 wheels for safe transport
- Advance speed 5.5 cm/s
- Return speed 25 cm/s
- Maximum log length 55 / 105 cm
- Oil quantity 6 litres
- Hydraulic system with double-acting cylinder
- Continuously adjustable stroke
- Solid, torsion-resistant steel construction
- Phase inverter standard
- Certificates CE
- Dimensions: L 810 x W 630 x H 1500 mm
- Weight approx. 138.0 kg
- Voltage V / Hz 400V/50Hz
- Input kW (hp) 3,7 (5,0)

You only have to decide whether you require short or long logs. No matter what you decide, the Ox 1–1000 copes with any lengths between 55 and 105 cm and helps to fill in gaps in your stack of wood.

A swinging-out table with safety bow facilitates the splitting of short wood. Like with any scheppach machine, you can be sure of a solid and perfect finish. The continuously adjustable stroke, the hydraulic system with double-acting cylinder, and the powerful motor ensure comfortable working, even with awkward logs. The splitting knife penetrates the wood without any problems, and it is quickly pulled upward again. The two-hand control guarantees that the splitter stops immediately as soon as one hand releases the handle.

Your splitter is easily available at any place, the wheel assembly supplied as standard, makes it mobile.

Technical data
L/W/H mm 750/630/1,650
Splitting power tons 10
Cylinder riser cm 53
Stroke approach 1st stage cm/sec 4
Stroke reverse cm/sec 18
Weight approx. kg 200
Plug-in positions table - swinging-out
Max. wood length cm 56/105
Motor 400 V/50Hz
Input kW (HP) 4.1 (5.6)
Rpm 1,420

The two swivel-out tables of the Ox 3–910 offer you the choice between short and long pieces of wood. The low base plate makes it easy to load the splitter. Thanks to 8.5 ton splitting force and the standard extension wedge wood, the splitting of those large logs is completed with ease in the shortest possible time.


- Specification
- Double swinging table
- Splitting power 8,5 tons
- 2-hand safety control
- Cylinder stroke 48 cm
- Splitting cross and Extension wedge standard
- Table height 70 / 410 / 765 mm
- Working height 850 mm
- Wheel assembly with 4 wheels for safe transport
- Advance speed 6 cm/s
- Return speed 24 cm/s
- Maximum log length 54 / 89 / 105 / 125 cm
- Oil quantity 6 litres
- Hydraulic system with double-acting cylinder
- Continuously adjustable stroke
- Solid, torsion-resistant steel construction
- Phase inverter standard
- Certificates CE
- Dimensions: L 760 x W 575 x H 1010 mm
- Weight approx. 150,0 kg
- Voltage V / Hz 400V/50Hz
- Input kW (hp) 3,5 (4,8)

The special characteristics of the Ox 3-1000 are the two swing-out tables and the bottom plate. Due to the low height, the bottom plate facilitates the loading of the splitter. The two swing-out tables allow splitting of long and short logs at a splitting power of 10 tons. The standard extension driving wedge helps when splitting longer wood.

- Specification
- Double swinging table
- Splitting power 10 tons
- 2-hand safety control
- Cylinder stroke 53 cm
- Extension wedge standard
- Table height 50 / 430 / 810 mm
- Working height 930 mm
- Wheel assembly with 4 wheels for safe transport
- Advance speed 4 cm/s
- Return speed 20 cm/s
- Maximum log length 60 / 96.5 / 104 / 133 cm
- Oil quantity 9 litres
- Hydraulic system with double-acting cylinder
- Continuously adjustable stroke
- Solid, torsion-resistant steel construction
- Phase inverter standard
- Certificates CE
- Dimensions: L 830 x W 540 x H 1560 mm
- Weight approx. 154.0 kg
- Voltage V / Hz 400V/50Hz
- Input kW (hp) 4,1 (5,6)