Mafell HB 2 E 2 Speed Drill & HB 1 E Single Speed Drill

Thanks to its clockwise/counter-clockwise rotation and electronic speed control of 150 - 2250 rpm, the HB E is more flexible than almost any other comparable machine on the market. Unbeatable value for money.

The 43 mm (1 11/16 in.) steel collar fits into the MAFELL BST drill stand.

Torque pre-selection - therefore no refinishing necessary, no over-tightening of screws.
Considerable time-saving - due to the quick-action chuck which is also compatible with the percussion action.
Spindle lock - facilitates changing drill bits.

Delivery specification

1 supplementary handle; Ref. No. 078049
1 depth stop
1 Mains cable 4 m (13.1 ft)

Technical data
Nominal input 1050 W
Chuck Ø max. 13 mm
1st speed range 150 - 950 1/min
2nd speed range 300 - 2250 1/min
Torque 25 Nm
Weight 3,2 kg
Universal-motor 230 V / 50 Hz
Collar diameter 43 mm
Chuck capacity 13 mm

Safety friction clutch
High power reserves

Thanks to its clockwise/counter-clockwise rotation and electronic speed control of 150 - 2250 rpm, the HB E is more flexible than almost any other comparable machine on the market. Unbeatable value for money.

The 43 mm (1 11/16 in.) steel collar fits into the MAFELL BST drill stand.

Torque pre-selection - therefore no refinishing necessary, no over-tightening of screws.
Considerable time-saving - due to the quick-action chuck which is also compatible with the percussion action.
Spindle lock - facilitates changing drill bits.

Delivery specification

1 supplementary handle; Ref. No. 078049
1 depth stop
1 Mains cable 4 m (13.1 ft)

Technical data
Nominal input 1050 W
Chuck Ø max. 13 mm
Nominal no-load speed 70 - 530 1/min
Torque 50 Nm
Weight 2,7 kg
Universal-motor 230 V / 50 Hz
Collar diameter 43 mm
Chuck capacity 13 mm