Mafell STAB65E
Oscillating Jig Saws
Developed for continuous daily use. With 700 watts (0.9 hp) nominal input, the MAFELL jig saws can perform cutting depths of 100 mm (315/16 in.). Due to the 4-step oscillating stroke control and the infinitely variable number of strokes from 500 to 3000 rpm, you always have the right setting for your material.
The stable guide plate made of die-cast aluminium provides you with integrated extraction and particular with an excellent, even surface for right-angled cuts. The differences in the MAFELL oscillating jig saws lie in the various handle designs. The STAK 65 E with knob handle, the STAB 65 E with bow handle and integrated permanent illumination of the cut and the STA 65 E with combined bow/knob handle.
• 4-step oscillating stroke control
• Cast base with integrated extraction
• Handle design according to individual requirements
• Proven saw blade clamping – for extreme loads.
• Low-lying saw blade holder – thus allowing both a greater cutting depth and lower gradient
with the same saw blade.
• Retractable guide plate – for working close to edges.
Supplied with:
1 MAFELL-MAX 4 m (13.1 ft) mains cable with plug.
Ref. No. 913 905
5 jig saw blades with various toothing, 1 splinter guard.
Ref. No. 076900
1 saw guard. Ref. No. 076899
1 Allen key WAF 4. Ref. No. 076902
Technical data
Cutting depth in:
- Wood 65/100 mm (29/16 / 315/16 in.)
- Plastic 30 mm (13/16 in.)
- Nonferrous metals 20 mm (13/16 in.)
- Ceramics/steel 10/10 mm (3/8 in.)
Tilting adjustment, both sides 0 – 45°
Stroke height 25 mm (1 in.)
No-load number of strokes 500 – 3000 rpm
Universal-motor voltage 230 V frequency 50/60 Hz
Nominal input 700 W(1) (0.9 hp)
Nominal output 490 W(1) (0.7 hp)
Weight 2.7 kg (6.0 lbs) 
