Mafell Z4E & Z5E Carpenters Bandsaw

With CUprex, the new high-performance motor
Variable digital electronics
Combined brake/off switch
Ball-bearing blade guide
30° tilting blade side

The new Z 4 Ec and Z 5 Ec portable bandsaws are the innovative successors to the legendary Z 3. Owing to a new, high-output motor and magnesium die-cast components, their persuasive benefits include reduced weight (Z 4 Ec 13.5 kg, Z 5 Ec 13.7 kg), enhanced performance, higher torque and excellent handling.

Exclusive with ball bearing saw band guidance for excellent band running and thus for optimum cutting. Maximum 8 mm saw bands for optimum flexibility when curving and profiling purlins and rafters.

The shorter arm of the Z 4 Ec gives rise to a maximum cutting depth of 225 mm (8 7/8 in.). For thicker work, the otherwise identical Z 5 Ec offers an impressive cutting depth of 305 mm (12 in.).

The precision that typifies MAFELL portable bandsaws enables the Z 4 Ec and Z 5 Ec to execute extremely clean and perfectly square cuts.

The cooling air of the high-performance motor is utilized to blow away dust from the mark. As a consequence, chips are kept well away from your head and you maintain a clear view of the mark at all times.

The back-toothed blade facilitates retraction from the cut, which is especially easy if the blade is locked by the mechanical brake.
The unique tilting blade guide allows right-angle cuts to be made up to 90 mm (3 9/16 in.) deep without the opposite side of the blade touching the wood, e.g. when cutting lapped joints.
With a spring-mounted and tensioned idler wheel, changing blades is an easy and quick procedure.

Delivery specification

1 Saw band, 8 mm (5/16 in.) wide, 4 teeth per inch, with front and rear cutting teeth
1 Saw band, 6 mm (1/4 in.) wide, 4 teeth per inch
1 Saw band, 8 mm (5/16 in.) wide, 4 teeth per inch
1 Handle for two-man operation
1 Parallel guide fence
1 Mains cable 10 m (32.8 ft)

Technical data
Cutting depth 225 mm
1 band side tiltable 0 - 30 °
Nominal no-load speed 650 - 1550 1/min
Nominal input 2250 W
Weight 13,5 kg
Universal-motor 230 V / 50 Hz
Cutting speed 6,9 - 16,6 m/s

With CUprex, the new high-performance motor
Variable digital electronics
Combined brake/off switch
Ball-bearing blade guide
30° tilting blade side

The new Z 4 Ec and Z 5 Ec portable bandsaws are the innovative successors to the legendary Z 3. Owing to a new, high-output motor and magnesium die-cast components, their persuasive benefits include reduced weight (Z 4 Ec 13.5 kg, Z 5 Ec 13.7 kg), enhanced performance, higher torque and excellent handling.

Exclusive with ball bearing saw band guidance for excellent band running and thus for optimum cutting. Maximum 8 mm saw bands for optimum flexibility when curving and profiling purlins and rafters.

The shorter arm of the Z 4 Ec gives rise to a maximum cutting depth of 225 mm (8 7/8 in.). For thicker work, the otherwise identical Z 5 Ec offers an impressive cutting depth of 305 mm (12 in.).

The precision that typifies MAFELL portable bandsaws enables the Z 4 Ec and Z 5 Ec to execute extremely clean and perfectly square cuts.

The cooling air of the high-performance motor is utilized to blow away dust from the mark. As a consequence, chips are kept well away from your head and you maintain a clear view of the mark at all times.

The back-toothed blade facilitates retraction from the cut, which is especially easy if the blade is locked by the mechanical brake.
The unique tilting blade guide allows right-angle cuts to be made up to 90 mm (3 9/16 in.) deep without the opposite side of the blade touching the wood, e.g. when cutting lapped joints.
With a spring-mounted and tensioned idler wheel, changing blades is an easy and quick procedure.

Delivery specification

1 Saw band, 8 mm (5/16 in.) wide, 4 teeth per inch, with front and rear cutting teeth
1 Saw band, 6 mm (1/4 in.) wide, 4 teeth per inch
1 Saw band, 8 mm (5/16 in.) wide, 4 teeth per inch
1 Handle for two-man operation
1 Parallel guide fence
1 Mains cable 10 m (32.8 ft)

Technical data
Cutting depth 305 mm
1 band side tiltable 0 - 30 °
Nominal no-load speed 650 - 1550 1/min
Nominal input 2250 W
Weight 13,7 kg
Universal-motor 230 V / 50 Hz
Cutting speed 6,9 - 16,6 m/s