Mafell ZAF 200 Single End Tenoning Machine 415V

Mafell ZAF200
The ZAF 200 executes the full range of tenons quickly, accurately, efficiently and precisely. For straight or angled tenons, corner or ridge half-lap joints, you can always count on the ZAF 200 Tenoner. To ensure exact length measurements, the stop is adjusted on a scale. Developed specifically for the ZAF 200, the cutting tool can be rapidly adapted for different tenon lengths and half-lap joints. The ZAF 200 has precision setting options and a clearly laid-out control panel. Precise positioning of the timber is facilitated by a new built-in laser. The result is cuts which are accurate to the nearest millimetre (inch) in all types of timber! After setting the desired tenon geometry, the cutter head automatically executes the required shape – including angled, haunched and chamfered cuts. Chip waste is extractable as a matter of course. For hardwood applications, we recommend the ZAF 200 Vario with adjustable feed rate.
• Tilt range of cutting unit up to 60°
• Laser positioning
• Special cutting tool
• Minimal space requirement – the workpiece always remains in the same position.
• Considerable time-saving – due to quick and easy adjustment of length, angle and tenon dimensions.
• No chip waste – fully extractable.
• Maximum timber dimensions 400 x 200 mm (153/4 x 73/4 in.) at 0° and 200 x 200 mm (73/4 x 73/4 in.) at 60°.

Technical data ZAF200Maximum timber sizes (W x H) for right-angled tenons 400 x 200 mm (153/4 x 73/4 in.)Maximum timber sizes (W x H) for 60° angled tenons 200 x 200 mm (73/4 x 73/4 in.)Length of support (with scale for adjusting length stop) 3 m (9.8 ft)Motor, Three-phase - voltage 400 V- frequency 50/60 HzNominal input 6000 W (8 hp)Nominal output 5000 W (6.7 hp)Nominal no-load speed 7600 rpmNormal load speed 7140 rpmCutting speed 37.4 m/s (122.7 ft/sec.)Weight approx. 380 kg (837.8 lbs)