Proxon PD230/E Engineering Lathe

Free Delivery to Orange areas









Proxxon PD 230/E Precision Lathe

• Distance between centres - 230mm
• Swing over top slide - 116mm
• 6 Speeds - 80 2,800rpm
• Motor power - 150W
• Chuck diameter - 100mm
• Weight - 10kg

A nice, small, high precision lathe, suitable for all metals and plastics. With a distance between centres of 230mm and a swing of 52mm and offering 28mm over the slide. Equipped with automatic feed, thread cutting facilities, headstock chuck, live centre and top slide for taper turning. Electronic speed control giving a spindle speed range from 100-3000rpm with 3 belt speeds, plus the motor has forward and reverse rotation. The spindle runs in high precision ball bearings and offers an accuracy of 0.01mm without the chuck. It also has an internal bore of 10.5mm. The automatic feed offers 0.05 or 0.1mm per revolution for a choice of cutting finishes. The tailstock has a 1MT internal bore with a spindle travel of 30mm. The standard three jaw chuck has a capacity of 2-25mm with the internal jaws, and 24-68mm on the external jaws. The hand wheels are fitted with zero adjustable scales with 40 divisions each of 0.025mm/division. The thread cutting facility covers the most important pitches of 0.5-0.625-0.7-0.75-0.8-1.0-1.25 & 1.5mm. The important item that ensures this high accuracy is a fine, grey cast iron bed with ground slide ways ensuring minimal deflection of the cutter, even under high loads. This lathe weighs 13.5kg so is portable enough to be stored away when not in use. Many other accessories are available for this machine, such as a milling/drilling head, drip tray, stand etc. Made in Europe, this machine offers a lot extra over most other small machines available today.

Specification
Model PD 230/E
Cross Slide Travel 60mm
Distance Between Centres 230mm
Height Over Cross Slide 28mm
Nett Weight 13.55kg
Power 150W
Speed Range 6/ 80 - 2,800rpm

Free Delivery to Orange areas




Proxxon 4 Jaw Independent Chuck for PD 230/E

• Independently adjusted jaws
• For clamping unsymmetrical pieces, ovals, squares and odd-shaped work pieces
• 80mm capacity.

The 4 jaws are adjusted independently, thus clamping unsymmetrical pieces, ovals, squares and odd-shaped work pieces. 80mm capacity

Proxxon Splash Guard & Chip Collecting Tray for PD 230/E

• Made from 1.5mm steel plate, powder coated
• Slopes on the front and rear make it easy to clean
• Seeping through of coolant is impossible
• 495mm long x 215mm wide x 150mm high

Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front & back allow easy cleaning. Mounting hole and raised base to secure lathe are pre-drilled. Length 495mm, width 215mm, height 150mm.

Proxxon Centre Turning Attachment for PD 230/E

• Ideal for turning with highest possible accuracy
• Includes 2 centres, face plate & drive dog
• Supplied in a wooden box with sliding lid

Used for highest accuracy with high rotational precision. One faceplate, 2 fixed 1MT (short) centres, and 1 drive dog are included. Supplied in a wooden box with sliding lid.

Proxxon Fixed Steady for PD 230/E

• For turning long, slender work
• Fits directly to the bed
• Used when the tailstock support is inadequate
• Max. dia. 40mm

Used when turning long, slender pieces, capacity up to 40 mm. Also used when the tailstock cannot be utilised.

Free Delivery to Orange areas



Proxxon PF 230 Mill/Drill Head

• Set includes column, mounting bracket and bolts
• Top slide is replaced with the table
• Three collects of sizes 6, 8 & 10mm are included

Set includes column (35 x 400mm), mounting bracket and bolts. The mounting position on the PD230/E is already milled. The lathe's top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 6mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the micro FF230. Three collets of sizes 6,8 and 10mm are included.