Charnwood Bench Top Router Tables W012

A router table will convert a hand held plunging router into a stationary tool which is safer to use and quicker to set up. Ideally suited for all 1/4" sized routers this new compact router table will perform a variety of jobs such as edge moulding, trenching and tenoning. The three clamps supplied as standard will hold the workpiece securely against the cutter leaving the operator to merely feed the timber through from right to left. Suitable for use with cutters up to 35mm diameter.

Supplied with tough plastic insert plate, 20mm MDF table, adjustable fence with two replaceable wooden faces, horizontal feather board clamp, two vertical clamps, transparent cutter guard, sliding mitre fence and 40mm diameter dust extraction outlet.

Specification:
Table Size 430mm x 400mm
Table Height 290mm
Table Thickness 20mm
Table Aperture 35mm
Dimensions WxDxH 430mm x 400mm x 450mm
Weight 8Kg
Rating DIY

Extends the collet by 60mm.

When working with a router table which has a table made of thick material, typically the cast iron type or home made tables, a collet extension may be required. Certain jobs require the cutter to be lifted above the surface of the table. If the table is thick, there may not be enough plunge depth on the router to achieve this.
This collet extension can be used with all 1/2" shank routers and will lift the cutter by an additional 60mm.
A 19mm and a 22mm spanner are required to tighten the collet.

Can be mounted underneath the table top or on the leg of a stand. Avoiding the user having to reach under the table to turn the router on and off. The switch also provides a handy emergency Stop Button. This switch can also be used on other machinery up to 2200watts. Supplied with integral socket, separate start and stop buttons, 2m cable, plug and fixing kit.

Size 80 Wide x 120 High x 130mm Deep