Charnwood W015 Router Table with Sliding Bed

Free Delivery to all Orange areas on our shipping map

































A heavy duty routing table with a strong steel floorstand and a table top of cast iron. The front half of the table is actually a sliding carriage and is fitted with a fence and work clamp to make short work of end grain cutting and tenons. This cross cut fence can be fitted anywhere along the length of the table and can also be locked in at 45 degrees.
The main fence used for edge moulding and trenching operations has independently adjustable infeed and outfeed fences, ideal for planing edges, and two spring plates to hold the work piece down against the table.
Any sized router can be mounted to this table using the clamping set provided. To give easy access to the router when changing settings the whole table top is hinged and supported by gas filled struts to counteract the heavy weight of the cast iron top. To safely start and stop the router we include an NVR switch which can be mounted on the leg of the floorstand also providing an emergency stop facility.

Supplied with 2 removable insert rings, router mounting clamps, NVR switch & dust extraction outlet 60mm diameter.

Specification:
Table size 790mm x 570mm
Table height 860mm
Table apertures 100mm, 60mm & 30mm
Sliding carriage stroke 900mm
Dimensions (WxDxH) 1020mm x 720mm x 1110mm
Weight 61Kg
Rating Trade

Free Delivery to all Orange areas on our shipping map
































A heavy duty routing table with a strong steel floorstand and a table top of cast iron. The front half of the table is actually a sliding carriage and is fitted with a fence and work clamp to make short work of end grain cutting and tenons. This cross cut fence can be fitted anywhere along the length of the table and can also be locked in at 45 degrees.
The main fence used for edge moulding and trenching operations has independently adjustable infeed and outfeed fences, ideal for planing edges, and two spring plates to hold the work piece down against the table.
Any sized router can be mounted to this table using the clamping set provided. To give easy access to the router when changing settings the whole table top is hinged and supported by gas filled struts to counteract the heavy weight of the cast iron top. To safely start and stop the router we include an NVR switch which can be mounted on the leg of the floorstand also providing an emergency stop facility.

Supplied with 2 removable insert rings, router mounting clamps, NVR switch & dust extraction outlet 60mm diameter.

Specification:
Table size 790mm x 570mm
Table height 860mm
Table apertures 100mm, 60mm & 30mm
Sliding carriage stroke 900mm
Dimensions (WxDxH) 1020mm x 720mm x 1110mm
Weight 61Kg
Rating Trade

Extends the collet by 60mm.

When working with a router table which has a table made of thick material, typically the cast iron type or home made tables, a collet extension may be required. Certain jobs require the cutter to be lifted above the surface of the table. If the table is thick, there may not be enough plunge depth on the router to achieve this.
This collet extension can be used with all 1/2" shank routers and will lift the cutter by an additional 60mm.
A 19mm and a 22mm spanner are required to tighten the collet.

Can be mounted underneath the table top or on the leg of a stand. Avoiding the user having to reach under the table to turn the router on and off. The switch also provides a handy emergency Stop Button. This switch can also be used on other machinery up to 2200watts. Supplied with integral socket, separate start and stop buttons, 2m cable, plug and fixing kit.

Size 80 Wide x 120 High x 130mm Deep