Scheppach HF3000ci Spindle Moulder

Scheppach hf3000ci
Experienced woodworkers will always choose the hf 3000ci spindle moulder.

The correct speed and an accurately set tool are a prerequisite for an optimum moulding result without the necessity of subsequent finishing work. The scheppach hf 3000 gives you the choice of three speeds – the chosen rate is indicated on an electric display.

Precise settings. The adjustable fences have settings to within 1/10th of a millimetre. The spindle height adjustment also has a fine setting facility. If required, you can attach an optional sliding table carriage with clamping and tenon-cutting device (also retro-fittable). With the corresponding cutters fitted, the standard forward and reverse drive allows guiding the workpiece above the cutter tool, thus increasing working safety. Another safety feature is the standard motor brake.

Standard equipment
Cast iron table plate, height adjustable moulding spindle with clockwise and anti-clockwise rotation, moulding fence with individually adjustable fence rails, curved moulding fence, exchange-able table insert ring, electrical rpm indicator, suction connector

Technical data
Dimensions ( L / W / H ) 640 x 660 x 1050mm
Table size 640mm x 480mm
Table height 880mm
Table opening Ø 115mm/142mm
Spindle Ø 30mm
Spindle height adj. 100mm
Spindle speed 3,000/6,000/9,000rpm
Tool hole Ø 30mm
Max. tool Ø 200mm
Tool clamping height 100mm
Suction connector Ø 100mm
Weight approx. kg 120kgs

Motor 230 V /50 Hz
Input 2.8kw (3.8hp)
Output 1.8kw (2.5hp)
Speed 2,800rpm
Brake Yes
Motor protection Yes
Switch/plug unit with no-volt release Yes

Scheppach hf3000ci
Experienced woodworkers will always choose the hf 3000ci spindle moulder.

The correct speed and an accurately set tool are a prerequisite for an optimum moulding result without the necessity of subsequent finishing work. The scheppach hf 3000 gives you the choice of three speeds – the chosen rate is indicated on an electric display.

Precise settings. The adjustable fences have settings to within 1/10th of a millimetre. The spindle height adjustment also has a fine setting facility. If required, you can attach an optional sliding table carriage with clamping and tenon-cutting device (also retro-fittable). With the corresponding cutters fitted, the standard forward and reverse drive allows guiding the workpiece above the cutter tool, thus increasing working safety. Another safety feature is the standard motor brake.

Standard equipment
Cast iron table plate, height adjustable moulding spindle with clockwise and anti-clockwise rotation, moulding fence with individually adjustable fence rails, curved moulding fence, exchange-able table insert ring, electrical rpm indicator, suction connector

Technical data
Dimensions ( L / W / H ) 640 x 660 x 1050mm
Table size 640mm x 480mm
Table height 880mm
Table opening Ø 115mm/142mm
Spindle Ø 30mm
Spindle height adj. 100mm
Spindle speed 3,000/6,000/9,000rpm
Tool hole Ø 30mm
Max. tool Ø 200mm
Tool clamping height 100mm
Suction connector Ø 100mm
Weight approx. kg 120kgs

Motor 230 V /50 Hz
Input 2.8kw (3.8hp)
Output 1.8kw (2.5hp)
Speed 2,800rpm
Brake Yes
Motor protection Yes
Switch/plug unit with no-volt release Yes

Picture shows the machine with all optional extras Standard outfeed table is 420mm x 670mm
The optional outfeed table is 830mm x 480mm

Sliding table carriage run on ball bearings, 480 x 500 mm in anodised aluminium, guide rail with double rod guidance, swivelling fence 2 x 45°, exchangeable fence rails 850–1,500 mm, clamping attachment with locking fence and fine adjustment.

0.32 kW single-phase
Speeds: 6/8/10/13 M/min
clockwise/anti-clockwise running
3 rollers

Spindle moulder cutter block, specifically designed for rebating. Fits any moulder with a 30mm diameter spindle. The cutterblock has 2, double edged, planing knives and 4 spur cutters. The spur cutters give a clean crisp edge to the internal corner when rebating. The spurs can removed if required.

We also include a guide ring, which consists of a bearing with 30mm bore and a collar to run the work piece along. It is used for cutting rebates into curved timber, but should only be used with an appropriate ring fence fitted to the moulder.

The block is supplied in a foam lined aluminium storage case to keep it safe.

The cutting knives are double edged and replacements are supplied as a pair.
the spur cutters have 4 points and replacement s are supplied as a set of 4.


Specification:
Diameter 85mm
Height 50mm
Bore 30mm
Rebating Knives 2
Spur Cutters 2 Top, 2 Bottom
Maximum rebate cut 25mm
Guide Bearing Diameter 85mm

Pair of knives for rebate cutterblock 50mm in length.
Double edged.