Startrite Thicknessers

The perfect match for the DMA surface planer to give separate surfacing and thicknessing capacity for the smaller workshop. It has a 100mm cutter block with four knives and two feed speeds with an independent feed motor of 1.5hp. Rollers in the table are standard to help with the feeding of difficult material.

Specification
Working Width (mm) 410mm
Working Height (mm) 4-250mm
Max Depth of Cut (mm)
Feed Speed (m/min) 6-12 m/min
Electric Table Control
Rubber Outfeed Rollers
Additional (2nd) Rubber Outfeed Roller
Integral Table Rollers
Segmental Infeed Roller
Motor Power - 3 Phase (HP) 3hp, single phase
Weight (Kg) 370kg
Dimensions (mm)

The DMS53 has a capacity of 530mm x 300mm with a working table of 530 x 950mm with table rollers. As you would expect from a machine of this size it has two feed speeds and separate feed motor together with a separate motor for power lifting of the table. It has digital read out of working table position and a hand wheel for fine adjustment. The cutter block is 125mm diameter with four knives and driven by a 7.5hp main motor. With two feed speeds of 8 and 16 m/min, the DMS53 gives an excellent finish on all stock. The machine is heavily built at 680 kilo but provides an extremely economic solution for wide planing.

Specification
Working Width (mm) 530mm
Working Height (mm) 950mm
Max Depth of Cut (mm) 8mm
Feed Speed (m/min) 8 / 16M/Min.
Electric Table Control Yes
Motor Power - 3 Phase (HP) 7.5hp
Weight (Kg) 680kg