Thicknesser Jet JPM-13CSX

Free Delivery to Orange areas


Found a better price? Call us on :-
01622-884651
and we'll try to beat it, A quick phone call could save you £'sssss













Rubber-coated rollers drive timber at 6m/min
Adjustable feed roller pressure
Cranked handle sets depth of cut
Input 1,900W induction motor transmits power via a twin pulley vee belt drive system
Four lockable castors

The Jet JPM-13CSX thicknesser is a heavy duty machine with very substantial cast iron body and heavy gauge sheet steel base. The cast iron thicknessing table, which has a polished surface for reduced vibration and improved quality of cut, is supported on solid pillars at each corner and has extension rollers both front and back for improved timber support. The three-knife cutter block, which runs at 4800rpm, gives a clean finish on the timber, and adjustment to the cutter knives is easily made by removing the top waste guard. Rubber-coated rollers drive the timber through the machine at a rate of 6m/min and the feed roller pressure can be adjusted with the four adjusters on the top of the machine. The depth of cut is set by means of the cranked handle on the top using the setting scale positioned on the infeed side. Power is provided by a 1,900W induction motor, housed within the base and transmitting power to the cutter block via a twin pulley vee belt drive system. Four lockable castors allow the machine to be positioned with ease anywhere in the workshop

Specification
Model: JPM-13CSX
Cuts per Minute: 14,400
Cutterblock Diameter: 68mm
Cutterblock Speed: 4,800rpm
Dust Extraction Outlet: 100mm
Feed Speed: 6m/min
Knives: HSS(Resharpenable) x 3
Max Depth of Cut: 4mm
Max Planing Width: 330mm
Max Thicknesser Capacity: 250mm
Nett Weight: 90kg
Overall L x W x H: 910 x 540 x 1,020mm
Power: Input 2,000W
Rating: Trade
Length of Table: 950mm