Trend Kitchen Worktop Jigs

A worktop jig, designed to enable all 1/2inch shank plunge routers to cut precise butt & scribe joints in postform workstops.

Machined from hardwearing solid laminate. Will produce a joint in 15 minutes including setting-up time. Facilities to cut various widths of board and thicknesses up to 42mm. Integral panel bolt connector recessing template with easy spanner access. Width setting stop for accurate positioning. Supplied with clear & comprehensive instructions for use.
A single male and female template in 10mm solid laminate.
Offset widths 225,300,325,400,500,600 & 616mm. Integral single bolt recess slot for connecting bolts. Three alloy location bushes.
Jig requires:
A portable plunge router with 12.7mm (1/2inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2inch) diameter and 50mm (2inch) cut length.
Two 100mm (4inch) throat clamps.

Specifications
Size 845mm x 190mm x 10mm
Weight 1.8kg

A worktop jig, designed to enable all 1/2inch shank plunge routers to cut precise butt & scribe joints in postform workstops.

Machined from hardwearing solid laminate. Will produce a joint in 15 minutes including setting-up time.
Out-of-square joints can be accommodated.
Facilities to cut various widths of board and thicknesses up to 42mm. Integral panel bolt connector recessing template with easy spanner access. Width setting stop for accurate positioning. Supplied with clear & comprehensive instructions for use.
A single male and female template in 16mm solid laminate.
Facility to join boards from 500mm to 650mm wide. Two bolt recess slot for connecting bolts. Three alloy location bushes & width setting stop.
Cuts out of square joints (max. 3 degree).
Jig requires:
A portable plunge router with 12.7mm (1/2inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2inch) diameter and 50mm (2inch) cut length.
Two 100mm (4inch) throat clamps.

Specifications
Size 880mm x 233mm x 16mm
Weight 3.3kg

For up to 1000mm wide worktop now with cable tidy insert & circular hinge cut apertures.

A single male and female template in 16mm solid laminate. Facility to join boards from 450mm to 1000mm wide. Facility to cut 22.5 degree mitre corners for hob units. Intergral template slots for rounding and mitring of peninsular worktop corners for cable tidy inserts and a circular concealed hinge aperture and 3/4inch BSP holes for mixer taps. Three alloy location bushes and a width-setting stop.
Colour coded pin location for quick and use.
Three bolt recess slots for connection bolts.
Cuts out of square joints (max. 3 degrees).
Jig requires:
A portable plunge router with 12.7mm (1/2inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2inch) diameter and 50mm (2inch) cut length.
Two 100mm (4inch) throat clamps.

Specifications
Size 1200mm x 376mm x 16mm
Weight 9.6kg

Tradesman ALL IN ONE work top jig for up to 900mm worktops.

Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius penisular joint, 45degree end cut with slight radius, 22.5 degree trade corner solution, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.
Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge.
Three open-ended bolt recesses (dog bone style) for 150mm bolts. Engraved lines for short 65mm bolts and worktop cross-cut.
10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.
Engraved markings for identification of pin holes.

Specifications
1185mm x 390mm x 12mm
Weight 7.7kg