Trend Lock Jigs

This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks.

* For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1inch face-plate.
* Deeper mortises can be achieved with a suitable size of auger bit.
* Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
* CNC precision manufacturing plates & body.
* The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush & 12mm diameter long reach cutter.
* Other sizes of template available to special order, please contact Trend Tecnical Support for more information.

Specifications
Includes templates for locks having the following dimensions:
Face-plate Dimensions
Imperial (Metric) Template
7/8"x6" (22.2x156 mm) 1
7/8"x6 " (22.5x152.5 mm) 2
1"x4 3/4" (25.4x121 mm) 3
1"x5"(25.4x128 mm) 4
1"x5 1/4"(25.4x133.5 mm) 5
1"x5 3/4"(25.4x145 mm) 6
1"x6"(25.4x153 mm) 7
1"x6"(25.4x156.5 mm) 8
1"x6 1/2"(25.4x165.5 mm) 9
1"x7"(25.4x177 mm) 10
1"x2 1/4"(25x57.5 mm) 11 UPPER
1"x2 1/4"(26x56.5 mm) 11 LOWER
Mortise Dimensions
Imperial (Metric) Template
5/8"x2 3/4" 16x72 mm A
5/8"x4 1/4" 16x107 mm B
3/4"x3" 19x78 mm C
3/4"x4 1/4" 19x109 mm D

For routing the face-plate and mortise for larger locks quickly & accurately.

* Suitable for DDA (Disabilty Discrimination Act) lock size. 20mm x 235mm radius end face plate and 17mm x 170mm mortise.
* Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG).
* Suitable for doors 34mm to 58mm thick.
* An auger bit and drill is required to complete deep mortises

* 1 x Guide bush collar
* 1 x Face plate template
* 1 x Mortise template
* 1 x Template adapter