Charnwood W030P+ Spindle Moulder Package Deal with wheelbase
Charnwood W030P+ Spindle Moulder Package Deal with wheelbase. This is a fantastic package deal Charnwood, enhanced by Poolewood to include the ever popular W522 mobile wheel base to enable easy movement of the machine around the workshop. from Package Includes:
- W030 Spindle Moulder with Sliding carriage
- W030RC 1/2″ Routing Collet
- CB9830 Cutterblock with Straight Knives& 6 Profiles
- W030SD Sanding Drum Kit with 3 Sizes of Drum
- W522 Wheel Base
For most people purchasing our W030 Spindle Moulder, it will be the first moulder they have owned and therefore they will also require some tooling. Although there is a vast range of tooling available in the market, we have packaged a cutterblock and some of the most popular cutters together with the routing collet and drum sanding kit to give a great value package.
Charnwood W030 Spindle Moulder
Charnwood W030 Spindle Moulder is Cast Iron Spindle Moulder.
- Cast Iron Main Table
- Tenonning Table cast iron
- Cast Iron Cutter Hood
- 4 Speeds: Softwood, Hardwood, Routing, Sanding
- Maximum Tooling Diameter 160mm
- Independently Adjustable Fences
- 100mm Diameter Extraction Outlet
- Â 1/2″ Routing Collet
In detail
Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is therefore ideally suited to small professional workshops.
Also a precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position.
A simple belt change selects the correct spindle speed for the tooling. This 4 speed version provides even more versatility.
- 1500rpm – Drum Sanding
- 4500rpm – Moulding Hardwoods
- 6500rpm – Moulding Softwoods
- 8500rpm – Routing
The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. An extractor with 1000 cubic metres an hour airflow is recommended to cope.
Two aluminium fences are also adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out. It is controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are also connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling.
The sliding carriage also consists of a cast iron table with four bearing guides running along an aluminium extrusion. The fence angle can be set accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again. A hold down clamp and a length stop complete the equipment.
Also supplied with sliding carriage, Set of spindle shims, 4 adjustable height rubber feet, cable and plug.
Runs off any standard 13amp, 240v electric supply.