Charnwood W316P Bench Top Morticer Package Deal
Charnwood W316P Bench Top Morticer Package Deal consists of :
5/8″ Bench Top Morticer
MCCSET4 Chisel Set including 1/4″, 3/8″, 1/2″ & 5/8″ chisel
Charnwood W316 Bench Top Morticer with Sliding Bed
This is the Charnwood W316 Bench Top Morticer with Sliding Bed top hollow chisel morticer with an accurate sliding table system.
Key Features
Table Moves Through X and Y Axis.
For Strength & Stability is has a Iron Head.
A Cast Iron Table, Hard Wearing For A Long Life.
Cast Iron Fence, For Secure Workpiece Clamping.
For Fixing to a Workbench a cast iron base is also provided.
Plunging Head Controlled by Gas Filled Spring.
Quite Induction Motor Delivers The Power.
The operation of
Charnwood W316 Bench Top Morticer with Sliding Bed
The Charnwood W316 Bench Top Morticer with Sliding Bed utilises Cast Iron throughout hence giving it strength and rigidity. Therefore allowing timbers of up to 125mm deep and 145mm high to be clamped securely.
Two separate controls are provided for moving the table. Firstly the operator winds the table forwards or back until the chisel is aligned with the back edge of the mortice. Secondly the hand wheel is turned to move the table left or right until the chisel is positioned at one end of the mortice.
Pulling the main handle lowers the chisel and begins the cut. Once the first square has been cut, the chisel is withdrawn.The table is then moved over to begin the next square. Therefore the complete length of the mortice can been cut. The table can also then be wound backwards as required to create a wider mortice. The motor has also been specially produced to run at a lower rpm than standard motors. Therefore giving it a better cut with less chance of burning.
To make a series of identical cuts there is also a limit stop for the left and right side of the table movement.
Charnwood W316P Bench Top Morticer Package Deal with, mortice depth stop, handle return stop, chuck key, work clamp, 3/4″ chisel bush, cable and plug and set of chisels.