Charnwood PFK04 Frame Joining Kit – PFK04

£59.99 excl. VAT (£71.99 incl. VAT if applicable)

SKU: PFK04 Categories: , ,

In stock


Charnwood PFK04 Frame Joining Kit

Charnwood PFK04 Frame Joining Kit allows the hobby framer or artist to be able to join professional looking frames at home.

The frame clamp has a quick action mechanism. This enables the user to quickly and securely hold the two mitred pieces of moulding. Once clamped, the corner is turned upside down. It is then positioned on the non-slip base and up against the fence for accurate location of the wedge. The fence itself can be positioned to allow for any sized picture frame moulding. This is up to a maximum of 75mm wide. There is also a front and back locating stop.  This can be set when using wider mouldings that require two wedges in each corner.

When working the Charnwood PFK04 Frame Joining Kit with taller mouldings, up to 100mm. it is possible to perform an operation known as stacking. This is where two wedges are inserted on top of each other. The second wedge pushes the first one in deeper.  So that inserting 2 x 10mm height wedges is the equivalent of a 20mm wedge.

The driver for inserting the wedges has a square shaped magnetic tip.  This therefore securely holds the next wedge in place. The hand lever is pushed down. This does not require much force. Continue pushing until the wedge is fully inserted and flush with the back of the frame.

Once all 4 corners have been joined the frame is ready for the artwork to be put in, the backing board secured in place, using the T225 Tab Driver, and then hung on the wall.  A FREE hardware kit is also provided for the finishing touch.

FREE 266 Piece Hardware Kit

100 x 7mm Wedges.
100 x 10mm Wedges.
5m Picture Hanging Wire.
8 x Screw Eyes.
8 x D Rings.
8 x Screw Rings.
6 x Large Wall Hook.
4 x Small wall hook.
10 x Wood screw.
20 x Masonry Nail.
1 x Frame leveller (Spirit Level).