Charnwood PT200 8” x 5” Planer Thicknesser
Charnwood PT200 8” x 5” Planer Thicknesser Is a compact and portable planer thicknesser.
- 8” Planing Capacity
- 8” x 5” Thicknessing Capacity
- Aluminium Tables To Minimise Weight
- Extruded Guide Fence For Accuracy
- Tilting Fence With Twin Guides
- Rubber Coated Feed Rollers
- 100mm Diameter Chip Extraction Outlet
The PT200 is light enough to move off the bench when not in use and yet tough enough to produce 8″ x 5″ timber into flat and dimensioned pieces.
The planing beds are precision ground aluminium. The  fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required.
The steel thicknessing bed also has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutter block leaving a beautiful finish with no roller marks.
The redesigned dust hood now also has a quick action clamp to allow faster removal when changing between Planing and thicknessing modes. The hood fits onto the thicknessing bed during planing operations.It is then moved over the top when thicknessing. As a safety feature a location sensor detects that the dust hood has been correctly fitted. This therefore has to be correctly located before allowing the motor to run.
The PT200 is supplied with
- re-grindable knives.
- 100mm diameter dust extraction outlet.
- A blade setting tool
- 4 adjustable rubber feet
- 2.0m power cable and UK 3 pin plug.
It is essential to use dust extraction with a planer thicknesser. The extractor removes all the dust and chips which will otherwise build up, causing a blockage and eventually damage to the machine. Using an extractor also increases the life of the knives.