Charnwood Sliding Compound Mitre Saw with W215 folding floor stand – 305DBP2

MIWarranty 1 Year


£268.90 excl. VAT (£322.68 incl. VAT if applicable)

SKU: 305DBP2 Categories: , ,

Description

305DB 12″ Double Bevel Mitre Saw with W215 Folding Floorstand. For anybody needing to move the mitre saw around between different sites, or just needing to pack it away when not in use, this package is an ideal solution. The mitre saw is bolted onto the two runners which are supplied with the floorstand. The floorstand assembles in seconds and the saw sits on top locked on by two quick action levers. Handling longer lengths of timber whilst working solo, is easy thanks to the two extendable support arms which go out to a full 3m width.

305DB Mitre Saw Details

12” Diameter Blade
Twin Bar Bearing Guided Sliding Head
Double Bevel Facility
Adjustable Trenching Stop
Twin Laser Guide Precision
Built-in Carrying Handle
Spindle Lock For Blade Changing
60 Tooth TCT Blade Included
Vertical Work Clamp Included
Horizontal Work Clamp Included
Retractable Extension Wings Included
Dust Collection Bag Included
The design of this double bevel mitre saw gives a huge cutting capacity but uses clever design to minimise the amount of space it requires in the workshop. To create the compact size, the two guide bars remain stationary and the head slides along the bars on smooth linear bearings.

The mitre saw is capable of a 4″ deep cut in timber and a width of over 12″. To speed up cutting we include a mains powered (no batteries!) twin laser guide with one laser aligned to each side of the blade. Pencil lines drawn on timber ready to cut can quickly be lined up with the blade.

The required mitre angle can be quickly and accurately locked in, using the large comfy rubber grip at the front of the table. A large scale marked out in degrees allows any angle up to 48 degrees left or right to be set and locked off, although the most commonly used angles are pre-set and will engage automatically.

The double bevel feature which allows the blade to tilt to the left or right is a great benefit when doing jobs requiring lots of bevel cuts such as fitting skirting boards. Any angle can be locked off, although once again the most commonly used angled have pre-set stops which locate automatically.

The vertical clamp for holding the work piece down to the table can be fitted on either side of the blade, has a capacity of 105mm, particularly useful when working with longer timbers. In addition there is a horizontal clamp for holding timber up against the back fence. The clamp has a capacity of 220mm with a quick action adjusting system and a strong screw thread lock.

The base has four rubber feet, which are removable to reveal four fixing points for securing the mitre saw to a workshop bench, workmate or quick action clamps for use with a saw stand. The dust bag provided will collect some dust but whenever possible it is recommended an extractor is connected to the outlet. Depending on the diameter of the hose on the extractor, an adapter or Reducer will be required.

Supplied with 60 tooth TCT blade, 40mm diameter extraction outlet, dust collection bag, vertical work clamp, horizontal work clamp, left & right work piece supports, cable and plug.

 

W215 Mitre Saw Stand

Folding Legs – No tools Required
Quick Action Clamps – Mount & Dismount in Seconds
Extendable Roller Supports – Height Adjustable Too
Light Weight and Portable
Incredibly strong yet incredibly light is the best way to describe this versatile floorstand. The legs quickly fold down, without the need for any tools, and are made from round tube to keep the weight down. There are two roller supports, one at each end, which are adjustable to provide complete support for work pieces up to 3m in length. There is also a flip-up stop attached to each roller which speeds up repeat cuts.
Probably the best feature is the quick action clamping system. Any tool can be mounted onto the stand, or taken off for transport, in a matter of seconds. The two base runners remain attached to the tool and a simple lever locks the runners onto the stand. For smaller bench top machines you might even mount two at the same time.

The roller supports make it ideal for using with a mitre saw. We have also used them with a lathe, disc sander, belt sander, morticer. bandsaw and grinder.
A 2nd set of runners can be purchased that will then allow different tools to be swapped over in seconds.

Motor (Carbon Brush) 2000w, 240v
Blade Diameter 305mm
Blade Bore 30mm
Blade Speed 4500rpm
Depth of Cut at 90 degrees 105mm
Depth of Cut at 45 degree bevel 65mm
Width of Cut at 90 degrees 340mm
Width of Cut at 45 degree mitre 240mm
Blade Mitre Adjustment 0-48 Left & Right
Pre-set Mitre Angles 0, 15, 22.5, 30, 45
Blade Bevel Adjustment 0-45 Left & Right
Pre-set Bevel Angles 0, 15, 30, 45
Dimensions (W x D x H) 930mm x 850mm x 760mm
Weight 24Kg
Rating Hobby
Warranty 1 Year

UK Delivery options

Free delivery on most machines

For full UK shipping information click here. Free delivery for machines only applies to Mainland areas. If you are out of these areas, when you add your postcode shipping will be calculated based on your area. Sometimes we will have to acquire a custom quote, we will contact you with any extra costs.

International Delivery options

Europe & Rest of the world

To view our international shipping information click here. Most shipping will be quoted separately, when we do have a cost on record this will be quoted at the checkout.

Recommended products

Charnwood Universal Tool Stand – W215

£79.99 excl. VAT (£95.99 incl. VAT if applicable) View product