Spindle Moulder

This is currently out of stock and available again AROUND 10TH JULY 2017. We have left it open and marked in stock on our website in case you would like to purchase on a back order.

Ref: W040

£645.00 excl. VAT (£774.00 incl. VAT)

* Drum sanding kit is an optional accessory
** Routing collet is included with current offer

Cast Iron Spindle Moulder with sliding beam.

Cast Iron Main Table
Sliding Beam
Cast Iron Cutter Hood
4 Speeds: Softwood, Hardwood, Routing, Sanding
Maximum Tooling Diameter 160mm
Independently Adjustable Fences
100mm Diameter Extraction Outlet
OFFER – FREE 1/2″ Routing Collet

This new addition to our range has all the features of our best selling W030 model plus the addition of a sliding beam carriage, ideal for panel work, cutting end grain or making tenons.
The beam runs on a set of bearings giving a smooth and precise action and can be locked in position when not required. The 24″ capacity is perfect for cabinet doors. The mitre fence can be adjusted from 90 degrees to 30 degrees each way and is also fitted with a work clamp and flip over stop.
A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position.

A simple belt change selects the correct spindle speed for the tooling. This 4 speed version provides even more versatility.

1500rpm – Drum Sanding *
4500rpm – Moulding Hardwoods
6500rpm – Moulding Softwoods
8500rpm – Routing **

The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. An extractor with 1000 cubic metres an hour airflow is recommended to cope.
The two aluminium fences are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling.

SPECIAL OFFER : Order now and receive a FREE Routing adaptor to allow 1/2″ shank router bits to be used. Worth ¬£49 !!

Supplied with sliding beam, Set of spindle shims, 4 adjustable height rubber feet, cable and plug.
Runs off any standard 13amp, 240v electric supply.

Motor (induction) 1500w, 240v
Main table size 600mm x 400mm
Sliding table size 1000mm x 200mm
Sliding carriage stroke 620mm
Spindle diameter 30mm
Speeds 4 (1500, 4500, 6500 & 8500rpm)
Vertical stroke 110mm
Table aperture diameter 160mm
Table aperture depth 50mm
Table height 870mm
Fence size 125mm x 700mm
Dust extraction outlet 100mm
Dimensions (WxDxH) 1000mm x 1070mm x 1280mm
Weight 103kg
Rating Light trade
Warranty 1 Year

UK Delivery options

Free delivery on most machines

For full UK shipping information click here. Free delivery for machines only applies to Mainland areas. If you are out of these areas, when you add your postcode shipping will be calculated based on your area. Sometimes we will have to acquire a custom quote, we will contact you with any extra costs.

International Delivery options

Europe & Rest of the world

To view our international shipping information click here. Most shipping will be quoted separately, when we do have a cost on record this will be quoted at the checkout.