Charnwood TS10F Table Saw 10″ With Floorstand – TS10F
Charnwood TS10F Table Saw 10″ With Floorstand
- Tough, Large Area Steel Working Table
- Powerful 1500w Motor
- Quick Action Lock On Rip Fence
- Rip Fence Can Be Used Left or Right
- T-Slot Sliding Mitre Fence
- Floor Stand Included
- Push Stick Included
- Runs On Standard 13amp Supply
Superbly priced, entry level table saw capable of a wide range of projects in the workshop.
The saw is supplied with a rigid steel floor stand, lifting the table to a convenient height. The 10″ diameter saw blade is powered by a 2hp motor. It is also able to cut up to 3″ deep in softwoods, hardwoods and man made boards. The blade itself is a 40tooth Tungsten Carbide Tipped (TCT), for fast cutting performance.
The table top is manufactured from steel. It also comes with 3 additional extension tables, therefore giving a large flat area for working with panels. There are also 2 slots for the crosscut mitre fence to run in. The crosscut fence can also be adjusted to any angle within a 120 degree range. The aluminium fence can then be adjusted to close the gap to the saw blade.
The ripping fence can be used on either side of the blade and is also locked in position using the quick action clamp. The scale is clearly marked in millimetres, up to 280mm, with a built in reader. The aluminium fence can also be used in the High or Low position. Therefore, in the low setting allowing very narrow cuts in thin materials.
With safety in mind, the saw is fitted with: thermal overload protection (to protect the motor against over use). An NVR switch (to prevent re-start after a power failure). A push stick is also provided. This has storage clips on the side of the machine, therefore ensuring it can always be located quickly.
Left, right and rear removable extension tables, floor stand, mitre fence adjustable 60 degrees each way, dust extraction outlet 43mm diameter, 40 tooth TCT blade, push stick, cable and plug.