The Charnwood W020P Router Table Package
Charnwood W020P Cast Iron Router Table Package comprises
- W020 Router Table
- CE12 Collet Extension
- W026 NVR Switch
The W020 has a solid 1 piece cast iron table making it heavy and robust.The table sits on a rigid steel framed floor stand and is hinged to the stand allowing ready access to the router making it easier to make adjustments as and when required. The table has a 100mm aperture with inserts provided to reduce the aperture when using cutters of smaller diameter. The W020 router table is designed to be used by professionals thus Charnwood have rated it Trade.
- Precision Ground Cast Iron Table
- Hinged Top for Access to Router
- New Large Fence Design
- Spring Loaded Feather boards
- T-Slot Mitre Guide
- 68mm Diameter Extraction Outlet
- Floor stand Included
The rigid steel floor stand provides a comfortable working height for handling large panels. The table top is hinged to the floor stand and can be raised up, making the router more accessible when adjustments are needed. The table aperture is 100mm diameter with insert rings provided to reduce this size when using smaller diameter cutters.
The large router table fence allows work pieces to be securely held during the cut with the aid of 2 fence mounted feather boards, to hold the work down against the table. The front feather board to hold the work up against the fence. Using this method edge mouldings can safely be cut on to small pieces such as beading or picture frames.
There is also a scale, marked in both metric and imperial, mounted into the table to act as a guide when setting the fence.
The unique new centralising jig allows you to set your router accurately and quickly into the table. It then holds the router in place whilst you lock the clamps underneath the table. The clamps themselves have been redesigned to allow fast removal of the router. This is ideal for users who want to regularly remove and refit the router.
For the odd job where the whole face of the timber is being removed. A set of shims are supplied that can be added to the outfeed fence to step it out and provide support to the work piece.
The cast metal mitre fence runs in a T-slot and is particularly accurate on this model. The mitre guide swings from 90 to 30 degrees each way with locater stops at 45 degrees and a further stop at 90 degrees for accurate end grain work.
The clamping system, used to attach the router to the table, is universal allowing any sized router from any manufacturer to be used.
Supplied with 4 rubber feet, mitre guide and 68mm extraction outlet.
If mobility is needed due to space constraints in your workshop, our universal wheel base fits this router table very well and enables it to be effortlessly moved around.