Charnwood W040 Spindle Moulder
The Charnwood W040 Spindle Moulder is a cast Iron Spindle Moulder with sliding beam.
Cast Iron Main Table.
Cast Iron Cutter Hood.
4 Speeds: Softwood, Hardwood, Routing, Sanding.
Maximum Tooling Diameter 160mm.
Independently Adjustable Fences.
100mm Diameter Extraction Outlet.
1/2″ Routing Collet.
This Charnwood W040 Spindle Moulder has all the features of the best selling W030 model. Charnwood W040 Spindle Moulder also has the addition of a sliding beam carriage. This therefore makes it ideal for panel work, cutting end grain or making tenons.
The beam runs on a set of bearings therefore giving a smooth and precise action. It can also be locked in position when not required. The 24″ capacity is also perfect for cabinet doors. The mitre fence can be adjusted from 90 degrees to 30 degrees each way. It is also fitted with a work clamp and flip over stop.
The Charnwood W040 Spindle Moulder is also supplied with precision ground cast iron table. Also it has a steel base cabinet and a 2hp induction motor which therefore make up this fantastic spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can also be locked in position.
A simple belt change selects the correct spindle speed for the tooling. This 4 speed version provides even more versatility.
1500rpm – Drum Sanding
4500rpm – Moulding Hardwoods
6500rpm – Moulding Softwoods
8500rpm – Routing
The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. An extractor with 1000 cubic metres an hour airflow is recommended to cope.
The two aluminium fences are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling.
sliding beam, Set of spindle shims, Routing Collet For 1/2″ Shank Cutters, 4 adjustable height rubber feet, cable and plug.
Runs off any standard 13amp, 240v electric supply. Please note: if you also require accessories ie sanding drum,cutters etc. please also look at the Package deals W040P and