Charnwood W040P Spindle Moulder – W040P

£999.99 excl. VAT (£1,199.99 incl. VAT if applicable)

SKU: W040P Categories: , ,


Charnwood W040P Spindle Moulder

The  Charnwood W040P Spindle Moulder Package Includes:
W040 Spindle Moulder with Sliding beam
W030RC 1/2″ Routing Collet
CB9830 Cutterblock with Straight Knives& 6 Profiles
W030SD Sanding Drum Kit with 3 Sizes of Drum

The W040 is a Cast Iron Spindle Moulder with sliding beam.

  • Cast Iron Main Table
  • Sliding Beam
  • Cast Iron Cutter Hood
  • 4 Speeds: Softwood, Hardwood, Routing, Sanding
  • Maximum Tooling Diameter 160mm
  • Independently Adjustable Fences
  • 100mm Diameter Extraction Outlet

Key Features


The W040 also has all the features of the best selling W030 model plus the addition of a sliding beam carriage. Therefore it is ideal for panel work, cutting end grain or making tenons. The beam runs on a set of bearings giving a smooth and precise action. It can also be locked in position when not required. The 24″ capacity is perfect for cabinet doors. The mitre fence can also be adjusted from 90 degrees to 30 degrees each way and is also fitted with a work clamp and flip over stop.
A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can also then be locked in position.


In Use


A simple belt change selects the correct spindle speed for the tooling. Therefore this 4 speed version provides even more versatility.

1500rpm – Drum Sanding *
4500rpm – Moulding Hardwoods
6500rpm – Moulding Softwoods
8500rpm – Routing **

The cutter hood is cast iron with a dust outlet at the centre providing efficient extraction for this machine which can produce a high volume of dust and chips. An extractor with 1000 cubic metres an hour airflow is therefore recommended to cope.
The two aluminium fences are also adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can therefore be  quickly be lifted to allow clear access to change the tooling.

The W040 is also supplied with sliding beam, Set of spindle shims, 4 adjustable height rubber feet, cable and plug.
It is a 240v machine and therefore runs off any standard 13amp socket supply.

Motor (induction) 1500w, 240v
Main table size 600mm x 400mm
Sliding table size 1000mm x 200mm
Sliding carriage stroke 620mm
Spindle diameter 30mm
Speeds 4 (1500, 4500, 6500 & 8500rpm)
Vertical stroke 110mm
Table aperture diameter 160mm
Table aperture depth 50mm
Table height 870mm
Fence size 125mm x 700mm
Dust extraction outlet 100mm
Dimensions (WxDxH) 1000mm x 1070mm x 1280mm
Weight 103kg
Rating Light trade
Warranty 5 Year