Charnwood W730 Bandsaw
The Charnwood W730 Bandsaw ia 14″ Woodworking Bandsaw is the 2nd and largest of the Charnwood Mid range/sized bandsaw. All steel structure and large cast iron table provides a strong and sturdy operating platform. It sits on a cabinet which is is useful for storage and ifs often the differentiator when choosing between the Charnwood W730 Bandsaw and Charnwood B350. Charnwood W730 Bandsaw is a qulaity machine, this is very much a best seller, as it enables the user to undertake a wide variety of tasks.
Powerful 1.5hp Induction Motor.
Quick Release Blade Tensioning.
Handle to Accurately Set Table Angle.
Large Precision Ground Cast Iron Table.
Heavy Duty Bandsaw Blade Bearing Guides.
Quick Action Lock On Rip Fence.
Crosscut Mitre Fence Included.
Cabinet Floorstand Included.
Blade Tension Indicator.
Supplied with High Quality British Made Blade.
Primarily Used For Woodworking.
The Charnwood W730 Bandsaw has a 14″ wide capacity with a 9″ cutting depth. The large cast iron tilting table is precision ground for a truly flat surface. The table angle can also be accurately set using a rack & pinion system. It has a stop to ensure the table returns to the 90 degree position. The steel frame also ensures the rigidity required for high blade tension and accurate ripping.
The bandsaw blade is also kept true and straight by a set of 3 large bearing guides mounted to the blade guard. Further another set of 3 further bearing guides are mounted below the table. Therefore Charnwood recommend that the best method for controlling the blade is to have the side bearings running against the side of the blade. Also the rear thrust bearing running against the back edge of the blade. This configuration is also very simple for the operator to set up and adjust when working with different sized bandsaw Blades.
The rise & fall of the blade guard can be adjusted and locked in position with one hand. Therefore ensuring the blade guide is set just above the timber. This is also essential for safety reasons and to give the best control over the blade resulting in a true and straight cut.
A simple adjustment of the drive belt lowers the blade speed for anyone wishing to cut metals, plastics and very hard woods.
Charnwood W730 Bandsaw is supplied with:
A cabinet floorstand, rip fence, a cast metal sliding mitre guide with fence adjustable 45 degrees each way. 1/2″ high quality British made bandsaw blade. NVR switch. 100mm diameter extraction outlet and also a cable and plug. Charnwood W730 Bandsaw is finished off with a powder coated paint job to ensure this bandsaw will look good for many years.
This Bandsaw is also fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.
The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. It is possible to use this bandsaw for cutting metal but only with the correct blade fitted. (not supplied)
The optional wheel base provides a perfect companion allowing the bandsaw to be easily moved around the workshop by just one person. Ideal for ripping down that extra long plank.