Charnwood B350P
Charnwood B350P Package £549.99 excl. VAT (£659.99 incl. VAT if applicable)
Back to products
Charnwood B250P Package Deal
Charnwood B250P Package Deal £327.63 excl. VAT (£393.16 incl. VAT if applicable)

Charnwood B300P 12” Premium Woodworking Bandsaw Package Deal

£480.00 excl. VAT (£576.00 incl. VAT if applicable)

The Charnwood B300P Bandsaw Package Deal comprises:

  • This Charnwood B300P package includes:

      • B300 12″ Bandsaw, 6″ Cutting Depth
      • BB15 Woodpecker Blade 22400mm x 6mm(1/4″)x 6tpi
      • BB17 Woodpecker Blade 2240mm x 10mm (3/8″) x 4tpi
      • BB18 Woodpecker Blade 2240mm x 16mm(5/8″) x 4tpi
      • W522 Wheel Base

       

      Product Code: B300P
      Barcode: 5060281698322

Read more →

Available on back-order

Description

Charnwood B300P 12” Premium Woodworking Bandsaw Package Deal

The Charnwood B300P 12” Premium Woodworking Bandsaw Package Deal comprises:

    • B300 12″ Bandsaw, 6″ Cutting Depth
    • BB15 Woodpecker Blade 22400mm x 6mm(1/4″)x 6tpi
    • BB17 Woodpecker Blade 2240mm x 10mm (3/8″) x 4tpi
    • BB18 Woodpecker Blade 2240mm x 16mm(5/8″) x 4tpi
    • W522 Wheel Base

     

    Product Code: B300P
    Barcode: 5060281698322

 

The Charnwood B300P bundle components in detail:

 

Charnwood B300P – B300 12″ Woodworking Bandsaw

A floor standing woodworking bandsaw with a cutting capacity of 150mm (6″), big enough for most workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut.

The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B300 has three bearings on the blade guard. The two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.

The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale.

The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit.

The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.

Tensioning the blade correctly is made simple thanks to the features on this premium model. A blade tension lever quickly sets the tension. After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. The required tension varies according to blade width. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary.

A useful addition, especially for woodturners, is the addition of a circle cutting attachment. A sharp pointer can be lowered into the centre point of the circle and the diameter set on the support arm. Using this guide you can cut circles of any diameter up to 600mm.

For anybody wanting to do scroll work with really tight curves and intricate designs, there is an optional Scroll Guide System which will then allow a 3mm blade to be used achieving circle cutting of down to 30mm diameter.

A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

Supplied with 1/2” x 4tpi blade, rip fence, mitre fence, work light, floor stand, 2.0m power cable and UK 3 pin plug.

This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.

The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. The blade supplied can also cut Non-ferrous metals, Plastic and Acrylic. It is possible to use this bandsaw for cutting other materials, but only with a suitable blade fitted.

Manual

Charnwood B300P – Wheel Base

A heavy duty wheel base with all steel construction
2 Fixed Wheels, 2 Steering Wheels
Foot Pedal Control
Rubber Pads For Stability

 

Charnwood B300P – Bandsaw Blades

Manufactured in Great Britain.

Designed for all types of wood cutting, including contours, our Premium bandsaw blades feature a spring tempered high carbon steel blade with induction re-hardened teeth to 62HRC, providing decreased production times, better surface finish, increased fatigue resistance and longer blade life.

  • Ground teeth assure precision cutting, better finish and less kerf loss.
  • High carbon steel body hardened and tempered to 45 Rockwell C Hardness withstands greater cutting pressures and optimises fatigue strength.
  • Faster and more precise cuts.
  • Hardened teeth to 62HRC ensure longer life.
  • Teeth can be re-ground or re-shaped and re-set.
  • Lower cost per cut.

The bundle includes 3 blades in different widths: 16mm, 6mm & 10 mm.

 

All Our bandsaws are here