Charnwood VIPERIH Headstock Thread Adaptor M18 x 2.5mm to M33 x 3.5mm
£16.00 excl. VAT (£19.20 incl. VAT if applicable)
Headstock thread adaptor for woodturning lathes.
- For a lathe with M18 x 2.5mm headstock thread
- For a scroll chuck (or face plate) with M33 x 3.5mm thread
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
- Internal Thread: M18 x 2.5mm
- External Thread: M33 x 3.5mm
Charnwood VIPERIH Headstock Thread Adaptor M18 x 2.5mm to M33 x 3.5mm
About Charnwood VIPERIH Headstock Thread Adaptor M18 x 2.5mm to M33 x 3.5mm
Headstock thread adaptor for woodturning lathes.
To fit onto a lathe with M18 x 2.5mm headstock thread.
To mount a scroll chuck (or face plate) with M33 x 3.5mm thread.
Suitable for use with Charnwood Scroll Chucks Nexus3, Viper3 & Viper5. Plus any other brand with a M33 x 3.5mm thread.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
Compatible with the following lathes (among others):
Aldi (Often labelled incorrectly)
Elu DB180
Gude Birkichstrase 6 type 1000
Nordstrom MC500
Specifications for Charnwood VIPERIH Headstock Thread Adaptor M18 x 2.5mm to M33 x 3.5mm
| Specification | Value |
|---|---|
| Adaptor Type | Insert |
| Overall Length | 32mm |
| External Thread Size (To Fit Into A Chuck) | M33 x 3.5 |
| External Thread Length | 22mm |
| Internal Thread Size (To Fit Onto A Lathe) | M18 x 2.5mm |
| Internal thread Length | 25mm |
| Register | 7mm |
| Minimum Headstock Thread Length | 30mm |