Charnwood VIPERIE Thread Adaptor 1.1/4” x 8tpi to M33 x 3.5mm
£16.00 excl. VAT (£19.20 incl. VAT if applicable)
Headstock thread adaptor for woodturning lathes.
- For a lathe with 1.1/4” x 8tpi headstock thread
- For a scroll chuck (or face plate) with M33 x 3.5mm thread
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
- Internal Thread: 1.1/4” x 8tpi
- External Thread: M33 x 3.5mm
Charnwood VIPERIE Thread Adaptor 1.1/4” x 8tpi to M33 x 3.5mm
About Charnwood VIPERIE Thread Adaptor 1.1/4” x 8tpi to M33 x 3.5mm
Headstock thread adaptor for woodturning lathes.
To fit onto a lathe with 1 1/4″ x 8tpi headstock thread.
Suitable to mount a Scroll Chuck or Faceplate with an M33 x 3.5mm thread.
The thread adaptor has spanner flats to aid tightening or removal.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
Compatible with the following lathes (and others):
Delta 46-745
General 260
Nova 1624-44
Nova DVR XP
Nova 3000
Omega Stubby
Powermatic 4224
Powermatic 3520B
Record Maxi1
Record Maxi2
Rikon 70-500
Vega 1500 series
Vicmarc VL316
Vicmarc VL348
Woodfast M408V
Woodfast M908V
Woodfast M410V
Woodfast M910V
Specifications for Charnwood VIPERIE Thread Adaptor 1.1/4” x 8tpi to M33 x 3.5mm
| Specification | Value |
|---|---|
| Adaptor Type | Exert |
| Overall Length | 72mm |
| External Thread Size (Fits Into A Chuck) | M33 x 3.5 |
| External Thread Length | 29mm |
| Internal Thread Size (Fits Onto A Lathe) | 1 1/4″ x 8tpi |
| Internal thread Length | 27mm |
| Register | 6mm |
| Minimum Headstock Thread Length | 30mm |
| Spanner Flats | 46mm |
| Weight | 600g |