Charnwood VIPERIN Thread Adaptor M30 x 3.5mm to M33 x 3.5mm
£16.00 excl. VAT (£19.20 incl. VAT if applicable)
Headstock thread adaptor for woodturning lathes.
- For a lathe with M30 x 3.5mm headstock thread
- For a scroll chuck (or face plate) with M33 x 3.5mm thread
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
- Internal Thread: M30 x 3.5mm
- External Thread: M33 x 3.5mm
Charnwood VIPERIN Thread Adaptor M30 x 3.5mm to M33 x 3.5mm
About Charnwood VIPERIN Thread Adaptor M30 x 3.5mm to M33 x 3.5mm
Headstock thread adaptor for woodturning lathes.
To fit onto a lathe with M30 x 3.5mm headstock thread.
Suitable to mount a Scroll Chuck or Faceplate with an M33 x 3.5mm thread.
The thread adaptor has spanner flats to aid tightening or removal.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
Compatible with the following models (and others):
Arundel M300
Luna T90
Luna T100
Luna T120
Lurem
Minimax T124
Mnimax T90
Minimax T100
Minimax T120
Minimax Symtec
Proturn
Teknatool TL1500(EU)
Vicmarc M30 x 3.5mm
Woodfast C Series
Woodfast FL300
Woodfast M408H
Specifications for Charnwood VIPERIN Thread Adaptor M30 x 3.5mm to M33 x 3.5mm
| Specification | Value |
|---|---|
| Adaptor Type | Exert |
| Overall Length | 72mm |
| External Thread Size (To Fit Into A Chuck) | M33 x 3.5 |
| External Thread Length | 29mm |
| Internal Thread Size (To Fit Onto A Lathe) | M30 x 3.5 |
| Internal thread Length | 27mm |
| Register | 6mm |
| Minimum Headstock Thread Length | 30mm |
| Spanner Flats | 46mm |
| Weight | 600g |