Charnwood W619 8″ Cast Iron Table Saw – W619
£605.54 excl. VAT (£726.65 incl. VAT if applicable)
Specification
| Main Table Size | 530mm x 1000mm |
| Maximum Ripping Width Using Fence | 730mm |
| Crosscut Table Size | 400mm x 180mm |
| Maximum Crosscutting Width | 600mm (700mm Using Reverse Table) |
| Blade Tilt | 90 – 45 degrees |
| Cutting Depth at 90 degrees | 60mm |
| Cutting Depth at 45 degrees | 47mm |
| Blade Diameter | 200mm |
| Blade Bore | 30mm |
| Work Table Height | 860mm |
| Mitre Guide T-Slot Width | 15/19mm |
| Mitre Guide T-Slot Depth | 7mm |
| Motor (induction) | 1100w (1.5hp) / 240v |
| No-Load Blade Speed | 4700 rpm |
| Minimum Blade Width (Kerf) | 2.6mm |
| Dimensions (WxDxH) | 1460 x 1010 x 1030mm |
| Weight | 90Kg |
| Rating | Light Trade |
| Warranty | 5 Year |
 It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. The hose kit supplied collects dust from the sawguard and takes it to the single 100mm diameter hose connection point at the back of the machine.
Please note: It is not possible to use a stacked dado set with this saw.
Charnwood W619 8″ Cast Iron Table Saw
Charnwood W619 8″ Cast Iron Table Saw is a high quality  8″ table saw bench saw with cast iron work bench ideal for the small workshop. This is a top selling machine aimed at the home woodworker and light trade. Professional woodworking shops also buy them to compliment the large machines for undertaking smaller more delicate work. This is a best seller and we are yet to receive any negative feedback. Please remember before ordering the intended use, the 8″ cutting blade can sometimes be prohibitive. So if you need a larger cutting depth look at the W629. The Model we sell is now fitted with an upgraded quick action precision rip fence as standard. Charnwood W619 8″ Cast Iron Table Saw also has a Quiet Induction Motor.
Key Features of the Charnwood W619
- Cast Iron Precision Ground Table
- Extension Tables as Standard Equipment
- Sliding Carriage as Standard Equipment
- Separate Handwheels for Blade Adjustment
- 50mm Dust Extraction Outlet
- Solid Floorstand Base Included
- Optional Wheel Kit available
The Charnwood W619 is a compact, high quality table saw, also with a quiet induction motor. The main table is precision ground cast iron, and has 2 fabricated side extension tables thus it has an impressive cutting capacity. The induction motor turns the blade via a drive belt which also reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate handwheels. The sliding carriage, also included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts. For storage the right hand extension and sliding carriage can be removed in less than a minute and rebuilt in 2 1/2 minutes with no setting up required.
Supplied with the machine
Supplied with 20 tooth TCT saw blade, sliding carriage, extension tables, floorstand, push stick, adjustable feet, cable and plug.
You may also like…
Charnwood W522 Heavy Duty Mobile Base – W522
£71.99 excl. VAT (£86.39 incl. VAT if applicable)Stock:
Charnwood PSF Rip Fence Table saw upgrade kit
£67.65 excl. VAT (£81.18 incl. VAT if applicable)Stock:
