Charnwood W325P Floor Standing Morticer Package Deal – W325P

£570.00 excl. VAT (£684.00 incl. VAT if applicable)

SKU: W325P Categories: , ,

Description

Charnwood W325P Floor Standing Morticer Package Deal

The Charnwood W325P Floor Standing Morticer Package Deal consists of:

  • W325 Floorstanding Morticer
  • MCT2 1/4″ Professional Quality Chisel & Bit
  • MCT3 3/8″ Professional Quality Chisel & Bit
  • MCT4 1/2″ Professional Quality Chisel & Bit
  • MCT6 3/4″ Professional Quality Chisel & Bit

The Charnwood W325 Floor Standing Morticer is hollow chisel morticer with 1″ capacity.

 

Key Features

 

Table Moves Through X and Y Axis.
Cast Iron Body, For Strength & Stability.
A Cast Iron Table, Hard Wearing For A Long Life.
with Cast Iron Work Clamp with Quick Action Lock.
Welded Cabinet Stand with Storage Space.
Plunging Head Controlled by Gas Filled Spring.
Quite Induction Motor Delivers The Power.

The Charnwood W325 Floor Standing Morticer has a huge timber capacity of 8″ x 6″ and can cut to the full depth of the chisel.

 

In Operation

 

Extensive use of cast iron gives the entire Charnwood W325 Floor Standing Morticer strength and solidity. This also allows larger sizes of chisels to be used without flexing. The down feed handle can be adjusted so that a comfortable starting position can always be found. Also when cutting mortices in smaller timber the head can be lowered. Thus ensuring that the starting point of the chisel is just above the timber, which speeds up cutting.

When working with this machine the timber is held in place by a front clamp with a quick action lock and two further cam lock clamps.  Thus allowing the user to  hold the timber firmly down against the table therefore preventing lifting when raising the chisel.

There are then two separate controls for moving the table. Firstly the operator winds the table forwards or back until the chisel is aligned with the back edge of the mortice. The second hand wheel is turned to move the table left or right until the chisel is positioned at one end of the mortice.

The motor has been specially produced to run at a lower rpm than standard motors, which gives a better cut, with less chance of burning.

The cabinet style base,is also included as standard. Provided with a lockable hinged door on the front with a large storage area inside. Therefore perfect for keeping your chisels and service tools safe. 4 adjustable rubber feet ensure that levelling on an uneven floor is simple.

For anyone involved in component production, and wanting to make a series of identical cuts there are stops fitted to the table travel to set the width of the mortice.

Supplied with the Charnwood W325 Floor Standing Morticer

chuck key, mortice depth stop, handle return stop, Left and Right table stops, Length stop, 3/4″ chisel bush, adjustable rubber feet, cable and plug.

From Chisel Bush to Table 315mm
Maximum timber height with a 1/2″ Chisel 205mm
Maximum clamping width 145mm (6″)
Chisel capacity 1/4″ to 1″
Vertical Chisel Stroke (1 Stroke / Total Travel) 110mm (6″) / 230mm (9″)
Accepts chisel shank size 3/4″
Optional chisel shank size (Requires optional bush) 3/16″
Table travel (left to right) 165mm (6.5″)
Table travel (front to back) 150mm (6″)
From Back Fence to Chisel Centre 0mm to 150mm
Motor (induction) 750w (1hp), 240v
Motor Speed 1400rpm
Dimensions (WxDxH) 820mm x 720mm x 1800mm
Weight 120kg
Rating Trade
Warranty 1 Year

UK Delivery options

Free delivery on most machines

For full UK shipping information click here. Free delivery for machines only applies to Mainland areas. If you are out of these areas, when you add your postcode shipping will be calculated based on your area. Sometimes we will have to acquire a custom quote, we will contact you with any extra costs.

International Delivery options

Europe & Rest of the world

To view our international shipping information click here. Most shipping will be quoted separately, when we do have a cost on record this will be quoted at the checkout.