Charnwood W325PM Floor Standing Morticer Package Deal
The Charnwood W325PM Floor Standing Morticer Package Deal. This option comes with Metric Chisels consists of:
- W325 Floorstanding Morticer
- MCT08 8mm Professional Quality Chisel & Bit
- MCT10 10mm Professional Quality Chisel & Bit
- MCT12 12mm Professional Quality Chisel & Bit
- MCT15 15mm Professional Quality Chisel & Bit
The Charnwood W325 Floor Standing Morticer is hollow chisel morticer with 1″ capacity.
Table Moves Through X and Y Axis.
Cast Iron Body, For Strength & Stability.
A Cast Iron Table, Hard Wearing For A Long Life.
with Cast Iron Work Clamp with Quick Action Lock.
Welded Cabinet Stand with Storage Space.
Plunging Head Controlled by Gas Filled Spring.
Quite Induction Motor Delivers The Power.
The Charnwood W325 Floor Standing Morticer has a huge timber capacity of 8″ x 6″ and can cut to the full depth of the chisel.
Extensive use of cast iron gives the entire Charnwood W325 Floor Standing Morticer strength and solidity. This also allows larger sizes of chisels to be used without flexing. The down feed handle can be adjusted so that a comfortable starting position can always be found. Also when cutting mortices in smaller timber the head can be lowered. Thus ensuring that the starting point of the chisel is just above the timber, which speeds up cutting.
When working with this machine the timber is held in place by a front clamp with a quick action lock and two further cam lock clamps. Thus allowing the user to hold the timber firmly down against the table therefore preventing lifting when raising the chisel.
There are then two separate controls for moving the table. Firstly the operator winds the table forwards or back until the chisel is aligned with the back edge of the mortice. The second hand wheel is turned to move the table left or right until the chisel is positioned at one end of the mortice.
The motor has been specially produced to run at a lower rpm than standard motors, which gives a better cut, with less chance of burning.
The cabinet style base,is also included as standard. Provided with a lockable hinged door on the front with a large storage area inside. Therefore perfect for keeping your chisels and service tools safe. 4 adjustable rubber feet ensure that levelling on an uneven floor is simple.
For anyone involved in component production, and wanting to make a series of identical cuts there are stops fitted to the table travel to set the width of the mortice.
Supplied with the Charnwood W325 Floor Standing Morticer
chuck key, mortice depth stop, handle return stop, Left and Right table stops, Length stop, 3/4″ chisel bush, adjustable rubber feet, cable and plug.