Charnwood W813 Woodturning Lathe

Found a better price? Call us on :- 01622-884651
and we'll try to beat it.
A quick phone call could save you £'sssss


Free Delivery to all Orange areas on our shipping map

Cast iron construction, precision machining and great value for money are the key features of this lathe.
This new version of our best selling W812 now has an upgraded, more powerful, induction motor and a digital speed readout to accurately display the rpm of the spindle.

Spindles of up to 12" diameter and 35" in length can be precisely turned over the bed using the cam-lock sliding toolrest. The sliding tail stock also uses a cam-lock for quick adjustments. The rotating headstock design allows for larger diameter work, such as bowl turning, of up to 15" in diameter, to be turned over the front of the machine and obtaining the correct speed for cutting is no problem with the variable speed controller. When using the headstock rotated to the front, the extendable toolrest can be positioned on either the left or right hand side.

Supplied with hollow headstock and tailstock suitable for long hole boring, floorstand, NVR switch, 12" toolrest, 4 prong drive centre 1MT, revolving tail centre 1MT, 6" diameter faceplate, cable and plug.

Specification:
Distance between centres 900mm
Distance over bed 310mm
Motor (induction) 550w
Speeds (rpm) 500 - 2000
Spindle thread size 3/4" x 16tpi
Spindle taper 1MT
Dimensions (WxDxH) 1500mm x 450mm x 1120mm
Weight 82Kg
Rating Light Trade

Free Delivery to all Orange areas on our shipping map

Cast iron construction, precision machining and great value for money are the key features of this lathe.
This new version of our best selling W812 now has an upgraded, more powerful, induction motor and a digital speed readout to accurately display the rpm of the spindle.

Spindles of up to 12" diameter and 35" in length can be precisely turned over the bed using the cam-lock sliding toolrest. The sliding tail stock also uses a cam-lock for quick adjustments. The rotating headstock design allows for larger diameter work, such as bowl turning, of up to 15" in diameter, to be turned over the front of the machine and obtaining the correct speed for cutting is no problem with the variable speed controller. When using the headstock rotated to the front, the extendable toolrest can be positioned on either the left or right hand side.

Supplied with hollow headstock and tailstock suitable for long hole boring, floorstand, NVR switch, 12" toolrest, 4 prong drive centre 1MT, revolving tail centre 1MT, 6" diameter faceplate, cable and plug.

Specification:
Distance between centres 900mm
Distance over bed 310mm
Motor (induction) 550w
Speeds (rpm) 500 - 2000
Spindle thread size 3/4" x 16tpi
Spindle taper 1MT
Dimensions (WxDxH) 1500mm x 450mm x 1120mm
Weight 82Kg
Rating Light Trade

Chuck

For serious woodturners a geared scroll chuck is the only choice. This high precision 4 jaw chuck uses just one T-bar to adjust the jaws which means mounting a workpiece is very simple and you will not run out of hands.
The basic chuck has thread size M33 x 3.5 for all other thread sizes an additional insert must be purchased. For most Charnwood lathes use insert W836ID 3/4" x 16tpi.
The chuck is supplied with an Index plate marked with 24 positions.

Two additional jaw sets are available. The Large jaw set expands from 98mm to 135mm and contracts from 119mm to 82mm.
The Small jaw set expands from 22mm to 59mm and contracts from 43mm to 6mm.

Specification:
Mounting Thread M33 x 3.5
Chuck Body Diameter 95mm
Standard Jaw Expands from 45 to 82mm
Standard Jaw Contracts from 69 to 32mm
Indexing Positions 24
Weight 3kg
Rating Trade

Free Delivery to all Orange areas on our shipping map

Cast iron construction, precision machining and great value for money are the key features of this lathe.
This new version of our best selling W812 now has an upgraded, more powerful, induction motor and a digital speed readout to accurately display the rpm of the spindle.

Spindles of up to 12" diameter and 35" in length can be precisely turned over the bed using the cam-lock sliding toolrest. The sliding tail stock also uses a cam-lock for quick adjustments. The rotating headstock design allows for larger diameter work, such as bowl turning, of up to 15" in diameter, to be turned over the front of the machine and obtaining the correct speed for cutting is no problem with the variable speed controller. When using the headstock rotated to the front, the extendable toolrest can be positioned on either the left or right hand side.

Supplied with hollow headstock and tailstock suitable for long hole boring, floorstand, NVR switch, 12" toolrest, 4 prong drive centre 1MT, revolving tail centre 1MT, 6" diameter faceplate, cable and plug.

Specification:
Distance between centres 900mm
Distance over bed 310mm
Motor (induction) 550w
Speeds (rpm) 500 - 2000
Spindle thread size 3/4" x 16tpi
Spindle taper 1MT
Dimensions (WxDxH) 1500mm x 450mm x 1120mm
Weight 82Kg
Rating Light Trade

Chuck

For serious woodturners a geared scroll chuck is the only choice. This high precision 4 jaw chuck uses just one T-bar to adjust the jaws which means mounting a workpiece is very simple and you will not run out of hands.
The basic chuck has thread size M33 x 3.5 for all other thread sizes an additional insert must be purchased. For most Charnwood lathes use insert W836ID 3/4" x 16tpi.
The chuck is supplied with an Index plate marked with 24 positions.

Two additional jaw sets are available. The Large jaw set expands from 98mm to 135mm and contracts from 119mm to 82mm.
The Small jaw set expands from 22mm to 59mm and contracts from 43mm to 6mm.

Specification:
Mounting Thread M33 x 3.5
Chuck Body Diameter 95mm
Standard Jaw Expands from 45 to 82mm
Standard Jaw Contracts from 69 to 32mm
Indexing Positions 24
Weight 3kg
Rating Trade