Fox FX4000 Woodturning Chuck

All the Jaws and Accessories from the Vicmark VM100, Record RP4000, Rutlands Dakota XT700 and Charnwood W836 will fit on this Chuck




If you need 3/4" x 16tpi or 1" x 8tpi please order the insert below


FOX FX4000 Woodturning Chuck
c/w screw chuck


FX 4000 The flagship in the Fox wood chucks is the all new geared scroll chuck which is rapidly becoming the number one choice for all serious and professional woodturners. With the ability to tighten with just one hand using the T bar wrench, the FX 4000 is a pleasure to use. The standard jaws supplied enable the chuck to expand from 45mm to 85mm and contract from 71mm to 31mm. Precision CNC machined from top grade materials, this chuck will give years of trouble free enjoyable woodturnin

Optional Threaded sleeve to convert the chuck for use with any lathe
with a 3/4" x 16tpi thread on the headstock. Record Lathes

Optional Threaded sleeve to convert the chuck for use with any lathe
with a 1" x 8tpi thread on the headstock.

This new 28 LED magnetic light is ideal for any DIY use where better lighting is required.
The flexible arm is 370mm long and is fixed onto a magnetic base that can be turned on and off allowing the LED light to be securely attached to any steel or cast iron surface
. With 28 LED lights it produces more intense light than a traditional bulb with the added advantage of emitting very little heat. The power cinsuption for LED bulbs is also a fraction of traditional type bulbs.
There is a seperate on / off switch for the LED light and it runs off a 240v 13amp socket and comes complete with a 2m cable.

Ideal for use with a Lathe, Bandsaw, Fretsaw, Drill Press and many other types of machinery

Bowl Reversing jaws Ideal for finishing the bottom of bowls and small platters

Designed with an internal dovetail to fit securely onto the standard 2” (50mm) jaws.
These rings work in the same way as normal faceplates but with convenience of the easy chuck fitting. Available with an outer diameter of 3-1/8” (80mm)

Dovetail jaws - suitable for mounting bowls etc by expanding into the recess or contracting around a spindle. Precision design and manufacture provide a strong grip. Expands from 95mm to 130mm. Contracts from 120mm to 85mm.

Designed with an internal dovetail to fit securely onto the standard 2” (50mm) jaws.
These rings work in the same way as normal faceplates but with convenience of the easy chuck fitting. Available with an outer diameter of 4-3/4” (120mm)

Pin jaws - suitable expansion into a long narrow recess or for contracting around small longer
spindles. Expands from 25mm to 6Omm. Contracts from 45mm to 6mm.

4 additional jaws for the W836 Geared scroll chuck.
These jaws allow larger work pieces to be held than with the standard jaws.

Expands from 98mm to 135mm
Contracts from 119mm to 82mm

4 additional jaws for the W836 Geared scroll chuck. (Can also be used as a Pin Chuck)
These jaws allow smaller work pieces to be held than with the standard jaws.

Expands from 22mm to 59mm
Contracts from 43mm to 6mm

Long Nose Jaws for use with W836 lathe chuck.

The shape of these long nose jaws allow for various kinds of bowls to be held securely.

Expands from 35mm to 72mm
Contracts from 40mm to 3mm

Bowl reversing jaws for re-chucking bowls, once the inside has already been formed, to re-shape the outside.
For bowl diameters from 60mm up to 220mm. Two adjustable rubber grips on each jaw hold the workpiece securely.
Please note max. rpm 600.

Expands from 22mm to 59mm
Contracts from 43mm to 6mm