These Bowl Reversing Jaws are perfect for finishing the outside and bottom of any bowl. Lightweight but extremely strong aluminium plates with 10 positions and 8 rubber grips to gently hold the outside of a bowl without causing any damage to the turned piece.

With a fine internal and external dovetail, these jaws are perfect for fine intricate or miniature projects

These Pin Jaws have a multitude of uses. Ideal for small projects utilising the fine internal and external dovetail. The extra length of the jaws makes them perfect for working with awkward pieces of wood including burrs.

Essentially the larger version of the 100mm jaws. These jaws are designed to handle work up to 29" in diameter. They make an ideal companion to the Supanova chuck as the extra power exerted by the chuck matches the big capacity of these jaws.

For larger bowls and projects up to 13" (330mm) diameter that need a little more substantial holding power.

Zero Jaws will close down to under 1/8"(3mm).making them ideal for turning fine or delicate projects. They are a must for those specialising in miniature work. The dome shape is incorporated in the design to enable work very close to the project. It also allows internal holding of larger projects without the fear of marking the wood.

These jaws allow for even larger bowls up to 16" (4010mm) diameter to be held securely.

Rough turned bowls can be remounted internally with the reach of almost 4” (100mm) of these jaws. Extra Access to the back of the turned piece is aquired due to the tapered shape and the dovetail being 2" (50mm) away from the chuck body.

Large bowls and platters over 16" (4010mm) diameter can be turned due to the much larger spigot or recess this set of jaws allow.

Designed with deep sides to give extra grip on large logs and awkward pieces of timber. They also have a large internal and external dovetail to securely hold large bowls in excess of 16" (4010mm) in diameter

A Simple but very effective 4 prong drive centre that fits directly into the jaws of the chuck

Designed with an internal dovetail to fit securely onto the standard 2” (50mm) jaws.
These rings work in the same way as normal faceplates but with convenience of the easy chuck fitting. Available with an outer diameter of 3-1/8” (80mm)

Designed with an internal dovetail to fit securely onto the standard 2” (50mm) jaws.
These rings work in the same way as normal faceplates but with convenience of the easy chuck fitting. Available with an outer diameter of 4-3/4” (120mm)

An inexspensive mini screw chucksuitable for miniature projects that fits into the jaws of the Patriot woodturning chuck