Proxxon PD 250/E Precision Lathe – P-24002
£1,037.10 excl. VAT (£1,244.52 incl. VAT if applicable)
Proxxon PD 250/E Precision Lathe – P-24002
Distance between centres: 250mm
Swing: 140mm
Height over cross slide: 46mm
6 Speeds: 100-3000rpm
Motor power: 150W
Chuck diameter: 70mm
Weight: 12kg
Proxxon PD 250/E Precision Lathe – P-24002
Precision lathe Proxxon PD 250/E
- For face, longitudinal and taper turning, thread-cutting.
- For machining steel, brass, aluminium and plastic.
- Mounting flange for fastening the mill/drill head PF 230.
- Centre distance 250mm. Swing 70mm. Height over cross slide 43mm.
Proxxon PD 250/E Precision Lathe Machine bed: Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle.
Proxxon PD 250/E Precision Lathe Headstock:Â Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.).
Proxxon PD 250/E Precision Lathe Tailstock: Of die-cast aluminium. Sleeve Ø 18mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre.
Proxxon PD 250/E Support:Â Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm.
Proxxon PD 250/E Drive:Â Quiet DC special motor with 3-stage belt drive for 300 – 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 – 300 or 1,000rpm, depending on belt ratio. Clockwise – anticlockwise rotation. Main switch with emergency stop function and restart protection.
Proxxon PD 250/E Lathe chuck:Â High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 – 75mm. Including lathe chuck guard with safety shutdown.
Proxxon PD 250/E Handwheels:Â Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm).
Thread cutting device:Â With change gears for left-hand and righthand threads of the most important metric pitches (0.5 – 0.625 – 0.7 – 0.75 – 0.8 – 1 – 1.25 – 1.5mm).
Other technical data of the Proxxon PD 250/E:Â 230V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.
Everything Proxxon can be found here
Accessories for the Proxxon PD 250/E
Radius cutting attachment
Is mounted on the cross slide in place of the tool holder. For producing convex and concave shapes, for turning radii or 3/4 spheres with radii of 32mm max. Height adjustable tool holder (boring tool tip adjustable from 30 through 45mm above cross slide) for use with FD 150/E, PD 250/E, PD 400 and older PROXXON lathes. Dimensions: base plate 67 x 50mm, height 55mm. Including finishing cutter 8 x 8 x 80mm. In wooden box with sliding lid.
NO 24 062
Quick change tool post – easy to use!
For quick tool change and easy height adjustment. Includes 2 tool holder elements.
NO 24 026
Additional quick change tool holder (separately)
Can be used with the above above-mentioned quick change tool post.
NO 24 024
Chip collecting tray with splash guard
Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow slight clean-ing. Mounting hole and raised base to secure lathe are pre-drilled. L 550 x W 240 x H 160mm. The depicted lathe is not included in the offer.
NO 24 008
4-jaw chuck with independent jaws
For clamping angular and asymmetrically shaped work pieces. Capacity up to 80mm. Chuck Ø 75mm.
NO 24 036
Collet set with ER 20 collets:
For extreme true concentric accuracy. 2 – 10mm.
For high precision machining of round parts. The collet set is mounted instead of the lathe chuck. With 8 collets (2 – 2.5 – 3 – 4 – 5 – 6 – 8 and 10mm). Packed in a wooden box.
NO 24 038
Centre turning attachment.
For highest accuracy with high rotational precision.
This includes: 1 face plate, 2 fixed centres (MK 2 and MK 1/short) and 1 drive dog. Packed in a wooden box.
NO 24 014
Fixed steady for longer work pieces
Especially for boring. Also required if the tailstock cannot be used to “counter”. Up to Ø 40mm.
NO 24 010
Professional gear chuck with MK 1
For the tailstock of the PD 250/E. Capacity up to 10mm.
NO 24 020
Self-centering 3-jaw chuck
Identical to chuck of lathe PD 250/E. High quality clamping fixture as per DIN 8386, Class 1 (concentricity accuracy 0.04mm). Capacity through reversing jaws from 2 – 75mm. Suitable for PD 250/E and the dividing attachment NO 24 044.
NO 24 034
14-piece parallel supports set
Ground in pairs. For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 – 62 HRC). Parallel accuracy 0.02mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.
NO 24 266
Cutting tools of high quality cobalt HSS steel, ground
Five piece set
One each roughing out, parting, finishing cut, left and right cutter. Comes in wooden box with sliding lid. 8 x 8 x 80mm.
NO 24 530
Three piece thread cutting set
One cutter for external thread (ground to 60°, metric) one for internal thread, one 
general cutting. Comes in wooden box with sliding lid. 8 x 8 x 80mm.
NO 24 540
Parting tool holder and tool
Used in the PD 250/E quick change system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt. Spare tools available under NO 24 554.
NO 24 217
Spare tool for parting tool holder (not depicted)
As described above.
NO 24 554
Cutter set with tungsten inserts
Three holders (90mm long):
for roughing out;
for longitudinal work;
for 90mm boring bar, holes from 12mm.
Standard tungsten inserts, 55°, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included. 8 x 8mm.
NO 24 555
Tungsten disposable tips (not depicted)
For the holders as described above.
NO 24 557Ten piece set
Three piece centre drill set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 – 2.5 and 3.15mm.
NO 24 630
HSS boring tool set, 6 pieces
One each cutter for 60 degree (metric) and 55 degree (Whitworth) inside threads, 2.5mm – 3mm and 4mm. Shaft of Ø 6mm. Length 95mm. The cutters are held by a tool holder (9 x 9mm) that mounts to the tool post of either PD 230/E, PD 250/E or PD 400. Comes in wooden box with sliding lid.
NO 24 520
Tool holder for rotary tools.
For use on lathe machines.
Made of steel with standard 20mm MICROMOT collar size. For precise clamping of rotary tool IBS/E or LBS/E in the tool post of the lathe. Shaft 8 x 10mm. Total length 65mm.
NO 24 098
Die holder for round dies
For threads M 3 – 4 – 5 – 6 – 8 and 10. With holder Ø 10mm for mounting in the tailstock drill chuck of the lathe. The holder is held by hand while cutting the threads. Neatly packed in wooden box with sliding lid.
NO 24 082
Mill and drill head PF 230
Converts your Proxxon PD 250/E or PD 400 into a complete machining centre.
Incudes column (35 x 400mm), mounting bracket and fastening screws (the PD 250/E and PD 400 already come with a plane-milled surface). The lathe’s top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 5mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the MICRO miller FF 230. Three collets of sizes 6 – 8 and 10mm are included.
NO 24 104
Note:
Lathe not included.
